Tundra Overland Series Rear Bumper / 3rd Gen / 2022+

Main bumper structure made from 3/16″ P&O steel.
Bumper retains BSM (blind spot monitoring) functionality.
Bumper retains parking sensors.
Bumper requires cutting of the factory plastic bumper corners.
Bumper mounting plates and brackets made from 1/4″ P&O steel.
All bumpers come with 3/4″ thick D-Ring shackles fully welded inside and outside of the bumper.
Bumper fits around OE hitch receiver so the official tow rating is retained.
OE hitch receiver is not required to install bumper. Bumper can be installed without hitch in place to maximize ground clearance and departure angle.
All rear bumpers come with supplied reverse lights that will replace factory reverse lights
All rear bumpers come with backup light cutouts made to fit Baja Designs S2 flush mount, RIGID 2×3 SRM flush mount or Extreme LED 2×3 flush mount.
License plate light included with bumper.
Trailer wiring plug-in mounts next to license plate for easy access.
Weight: 151 lbs
NOT compatible with power rear bed step (must be relocated or removed)
Unless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.

Features & Benefits

Main bumper structure made from 3/16″ P&O steel.
Bumper retains BSM (blind spot monitoring) functionality.
Bumper retains parking sensors.
Bumper requires cutting of the factory plastic bumper corners.
Bumper mounting plates and brackets made from 1/4″ P&O steel.
All bumpers come with 3/4″ thick D-Ring shackles fully welded inside and outside of the bumper.
Bumper fits around OE hitch receiver so the official tow rating is retained.
OE hitch receiver is not required to install bumper. Bumper can be installed without hitch in place to maximize ground clearance and departure angle.
All rear bumpers come with supplied reverse lights that will replace factory reverse lights
All rear bumpers come with backup light cutouts made to fit Baja Designs S2 flush mount, RIGID 2×3 SRM flush mount or Extreme LED 2×3 flush mount.
License plate light included with bumper.
Trailer wiring plug-in mounts next to license plate for easy access.
Weight: 151 lbs
NOT compatible with power rear bed step (must be relocated or removed)
Unless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.

Specifications

Shipping & Lead Time

Brand lead time (C4 Fabrication): 6-8 weeks.

This product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.

Installation Video

⚠ California Prop 65: WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.