{"title":"Bumpers — Toyota Tundra","description":"","products":[{"product_id":"2022-2026-toyota-tundra-hybrid-active-front-spoiler-delete","title":"2022-2026 Toyota Tundra Hybrid Active Front Spoiler Delete","description":"\u003cp\u003eThe Active Front Spoiler Delete for the 3rd Gen Tundra Hybrid Engine Models allows you to remove the factory active air dam system without triggering error codes. This solution is required when installing most aftermarket front bumpers on hybrid models.\u003cbr\u003e\u003cbr\u003eConstructed from high-quality steel, it is built for long-term durability in both on-road and off-road conditions. Designed for a straightforward installation, this component integrates seamlessly with the vehicle’s existing systems. Proudly made in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eAllows for Removal of the Factory Active Front Spoiler Without Throwing Error Codes\u003cbr\u003eAllows Installation of Aftermarket Front Bumpers on Hybrid Engine Models\u003cbr\u003eProvides Additional Clearance when Used with the Factory Front Bumper\u003cbr\u003eConstructed from High Quality and Durable Steel\u003cbr\u003eFinished in a Hammer Black Powder Coated Finish for a Discrete and Clean Install\u003cbr\u003eProudly Made in America\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\u003cp\u003eHybrid Models\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eInstall difficulty\u003c\/th\u003e\n\u003ctd\u003e2\/5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eEstimated install time\u003c\/th\u003e\n\u003ctd\u003e1.5 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (Addictive Desert Designs):\u003c\/strong\u003e 4-6 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003cp\u003e📄 \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/ADD-installguide-AC76200NA01NA.pdf?v=1775497684\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":63539923419505,"sku":"AC76200NA01NA","price":81.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/AC76200NA01NA.jpg?v=1777574750"},{"product_id":"2014-2021-toyota-tundra-tube-rear-bumper","title":"2014-2021 Toyota Tundra Tube Rear Bumper","description":"\u003cp\u003eThe DV8 Offroad Tube Rear Bumper for the 2014-2021 Toyota Tundra features a sleek prerunner-style tube design that provides rear protection while maintaining a lightweight, low-profile appearance that complements the factory look of the truck.\u003cbr\u003e\u003cbr\u003eThe bumper includes mounts for two 3-inch pod lights for rear-facing trail lighting and welded-in zip tie tabs to help keep wiring clean and organized. It is compatible with the factory hitch and reuses the OEM license plate lights for a seamless installation.\u003cbr\u003e\u003cbr\u003eDesigned as a direct bolt-on replacement, the bumper installs using factory mounting points and is compatible with Blind Spot Monitoring on 2018-2021 models. It is finished in a durable micro-texture black powder coat and features CNC logo end caps for a clean finishing touch.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eSleek prerunner tube design\u003cbr\u003eLow profile lightweight design that complements the look and feel of the truck\u003cbr\u003e(2) 3\" pod light mounts\u003cbr\u003eWelded-in zip tie tabs for clean wire management\u003cbr\u003eCompatible with factory hitch\u003cbr\u003eUtilize factory license plate lights\u003cbr\u003eWorks with Blind Spot Monitoring (2018-2021)\u003cbr\u003eDirect fit\/bolt on design\u003cbr\u003eMicro-texture black powder coat finish\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\u003cp\u003eBolt-on\u003cbr\u003e2014-2017--Toyota Tundra  -  Compatible only with models that do not have Blind Spot Monitoring\u003cbr\u003e2018-2021--Toyota Tundra  -  Compatible with or without Blind Spot Monitoring\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMicro-Texture Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eCN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eInstall difficulty\u003c\/th\u003e\n\u003ctd\u003e3\/5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eEstimated install time\u003c\/th\u003e\n\u003ctd\u003e4 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (DV8 Offroad):\u003c\/strong\u003e Typically in stock — 24hr ship; OOS 30-60 days.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003cp\u003e📄 \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1118\/3812\/files\/RBTT2-07_Install_Guide_Final.pdf?v=1772833484\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":63539924730225,"sku":"RBTT2-07","price":972.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/RBTT2-07_offtruck-10.jpg?v=1777574841"},{"product_id":"2014-2021-toyota-tundra-tube-front-bumper","title":"2014-2021 Toyota Tundra Tube Front Bumper","description":"\u003cp\u003eThe Tube Front Bumper for the Toyota Tundra is built for both high-speed desert use and slow-speed rock crawling. It supports a 20\" dual-row light bar or up to six 3\" pods in the center, plus one 3\" pod per side. The optional prerunner-style push bar can mount a 20\" bar, four 7\" round lights, or eight 3\" pods. A speckled gray full skid plate provides added front-end protection. The bumper retains factory parking sensors \u0026amp; tow points, includes welded zip-tie tabs for clean wiring, and installs with a bolt-on process. Finished in micro-texture black powder coat.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eDesigned for a balance between high speed desert and rock crawling styles\u003cbr\u003eCenter of Bumper can Mount a 20” Dual Row Light Bar or (6) 3” Pod Lights\u003cbr\u003eBumper Wings can mount (1) 3” Light Pod per side (2 Total)\u003cbr\u003eOptional Push Bar can Mount a 20” Single\/Dual Light Bar, or (4) 7” Round Lights, or (8) 3” Pod Lights\u003cbr\u003eGray accent skid plates that accent the bumper like the iconic prerunner style.\u003cbr\u003eFull skid plate to offer offroad protection in the dirt and rocks.\u003cbr\u003eUltra high clearance design to prevent getting hung up on rocks.\u003cbr\u003eMultiple lighting arrangements to accept several variations of setups.\u003cbr\u003ePrerunner style push bar included (optional)\u003cbr\u003eWelded Zip-Tie Tabs for Clean Wire Management\u003cbr\u003eRetains Factory Parking Sensors\u003cbr\u003eRetains Factory Recovery Points\u003cbr\u003eMicro-Texture Black Powder Coat Finish\u003cbr\u003eBolt-on Installation\u003cbr\u003eNote: Optional Push Bar will partially Obstruct Front Camera View\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\u003cp\u003eBolt-on\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMicro-Texture Black Powder Coat, Speckled Gray Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eCN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eInstall difficulty\u003c\/th\u003e\n\u003ctd\u003e3\/5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eEstimated install time\u003c\/th\u003e\n\u003ctd\u003e4.5 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (DV8 Offroad):\u003c\/strong\u003e Typically in stock — 24hr ship; OOS 30-60 days.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003cp\u003e📄 \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1118\/3812\/files\/FBTT2-07_Install_Guide_Final.pdf?v=1764007251\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":63539958940017,"sku":"FBTT2-07","price":1060.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/FBTT2-07_Offtruck-1.jpg?v=1777575614"},{"product_id":"2022-2025-toyota-tundra-stealth-center-mount-front-bumper-w-top-hoop","title":"2022-2025 Toyota Tundra Stealth Center Mount Front Bumper w\/ Top Hoop","description":"\u003cp\u003eOur Front Bumper features a top hoop with integrated light mounts for running one 20” light bar or two pod lights. The front bumper also provides a center 20” light bar mount. The bumper offers a pair of 1” thick D-ring mounts and an optional Winch Kit for running up to a Warn Evo winch. Our front bumper is made from steel, and is finished in a dual-stage hammer black powder coat with satin black accent panels. It retains the factory parking sensors and fog lights. The bumper can be paired with our removable Aluminum Skid Plate. Made in the USA.\u003cbr\u003e\u003cbr\u003e* Please Note: The bumper does not retain the Toyota Safety Sense (adaptive cruise control) or front skid plate, and the top hoop obstructs the front camera. It is not compatible with hybrid models.\u003cbr\u003e\u003cbr\u003e** Please Note: Trimming is required for installation.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eAggressive Steel Design\u003cbr\u003eTop Hoop w\/ Integrated Mounts for (1) 20” Light Bar or (2) Pod Lights\u003cbr\u003e(1) 20” Light Bar Mount\u003cbr\u003e(2) 1” Thick D-Ring Mounts\u003cbr\u003eRetains OEM Parking Sensors \u0026amp; Fog Lights\u003cbr\u003e2-Stage Hammer Black Powder Coated Finish\u003cbr\u003eSatin Black Aluminum Accent Panels \u003cbr\u003eMade in the USA\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\u003cp\u003e- Trimming Required\u003cbr\u003e- Can Fits Up To A WARN Evo Winch With Add-On Winch Kit (AC7608101NA)\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eInstall difficulty\u003c\/th\u003e\n\u003ctd\u003e3\/5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eEstimated install time\u003c\/th\u003e\n\u003ctd\u003e2.5 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (Addictive Desert Designs):\u003c\/strong\u003e 4-6 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003cp\u003e📄 \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/ADD-installguide-F760353120103.pdf?v=1753717787\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":63540091683185,"sku":"F760353120103","price":1358.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/F760353070103-Lighthoop-4.jpg?v=1777581858"},{"product_id":"2022-2025-toyota-tundra-stealth-center-mount-front-bumper","title":"2022-2025 Toyota Tundra Stealth Center Mount Front Bumper","description":"\u003cp\u003eOur Front Bumper features a 20-inch light bar mount and a pair of 1-inch thick D-ring mounts. The bumper is made from steel, and is finished in a 2-stage hammer black powder coat. It retains the factory front camera, parking sensors, and adaptive cruise control. The bumper is fully bolt-on and made in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eAggressive Steel Design\u003cbr\u003e(1) 20” Light Bar Mount\u003cbr\u003e(2) 1” Thick D-Ring Mounts\u003cbr\u003eRetains OEM ACC\u003cbr\u003eRetains OEM Front Camera \u0026amp; Parking Sensors\u003cbr\u003e2-Stage Hammer Black Powder Coated Finish \u003cbr\u003eFully Bolt-On Installation\u003cbr\u003eMade in the USA\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\u003cp\u003e- Trimming Required\u003cbr\u003e- Can Fits Up To A WARN Evo Winch With Add-On Winch Kit (AC7608101NA)\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eInstall difficulty\u003c\/th\u003e\n\u003ctd\u003e3\/5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eEstimated install time\u003c\/th\u003e\n\u003ctd\u003e2.5 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (Addictive Desert Designs):\u003c\/strong\u003e 4-6 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003cp\u003e📄 \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/ADD-installguide-F760343070103.pdf?v=1748616731\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":63540092436849,"sku":"F760343070103","price":1133.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/F760343070103_PT002.jpg?v=1777591922"},{"product_id":"2022-2025-toyota-tundra-rear-bumper","title":"2022-2025 Toyota Tundra Rear Bumper","description":"\u003cp\u003eOur Rear Bumper features a low-profile fitment and two pod light mounts. Our bumper comes in two variations: with two 1-inch thick D-ring mounts and without D-ring mounts. It is made from steel, and is finished in a 2-stage hammer black powder coat. The bumper retains the factory parking sensors and blind spot monitoring. Made in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eLow-Profile Fitment\u003cbr\u003e(2) Mounts for Baja Designs S2 or RIGID SR-M Pod Lights\u003cbr\u003eOptional 1” Thick D-Ring Mounts\u003cbr\u003eRetains OEM Blind Spot Monitoring\u003cbr\u003eRetains OEM Parking Sensors\u003cbr\u003e2-Stage Hammer Black Powder Coated Finish\u003cbr\u003eDurable Steel Construction\u003cbr\u003eMade in the USA\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\u003cp\u003eTrimming Required\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eInstall difficulty\u003c\/th\u003e\n\u003ctd\u003e2\/5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eEstimated install time\u003c\/th\u003e\n\u003ctd\u003e2 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (Rago Fabrication):\u003c\/strong\u003e 1-3 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003cp\u003e📄 \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1220\/2430\/files\/Rago_InstallGuide_R7602350901NA.pdf?v=1746830753\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":63540092666225,"sku":"R7602350901NA","price":1178.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/R7602350901NA_Installed_5.jpg?v=1777591955"},{"product_id":"2022-2025-toyota-tundra-center-mount-winch-front-bumper","title":"2022-2025 Toyota Tundra Center Mount Winch Front Bumper","description":"\u003cp\u003eOur Front Bumper provides one 30-inch single row light bar mount and two 3-inch pod light mounts. It offers a winch mount and a pair of 1-inch thick D-ring mounts. It features a low-profile design. The bumper is made from steel, and it is finished in a 2-stage hammer black powder coat. The bumper retains the factory front camera, parking sensors, adaptive cruise control, and fog lights. Made in the USA\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eLow-Profile Fitment\u003cbr\u003eHidden Heavy-Duty Standard Winch Mount\u003cbr\u003e(1) 30” Single Row Light Bar Mount\u003cbr\u003ePair of 1” Thick D-Ring Mounts\u003cbr\u003e(2) 3” Pod Light Mounts\u003cbr\u003eRetains OEM Parking Sensors \u0026amp; Front Camera\u003cbr\u003eRetains OEM ACC\u003cbr\u003eRetains OEM Fog Lights\u003cbr\u003eOptional 3\/16” Aluminum Front Skid Plate\u003cbr\u003e2-Stage Hammer Black Powder Coated Finish\u003cbr\u003eDurable Steel Construction\u003cbr\u003eMade in the USA\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\u003cp\u003eNot Compatible With Hybrid Models\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eInstall difficulty\u003c\/th\u003e\n\u003ctd\u003e3\/5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eEstimated install time\u003c\/th\u003e\n\u003ctd\u003e2.5 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (Rago Fabrication):\u003c\/strong\u003e 1-3 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003cp\u003e📄 \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1220\/2430\/files\/Rago_InstallGuide_F7603622001NA.pdf?v=1746801355\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":63540092830065,"sku":"F7603622001NA","price":1403.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/F7603622001NA_Installed_10.jpg?v=1777592006"},{"product_id":"2022-2025-toyota-tundra-black-label-rear-bumper","title":"2022-2025 Toyota Tundra Black Label Rear Bumper","description":"\u003cp\u003eOur Rear Bumper offers a low-profile fitment and satin black accent panels. It is compatible with the OEM parking sensors, blind spot monitoring, license plate lights, and rear lights. The bumper is finished in a 2-stage hammer black powder coat, and it is made from steel. The bumper is straightforward to install. Made in the USA.\u003cbr\u003e\u003cbr\u003e* Please Note: Trimming is required for installation.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eAggressive Plate Steel Design\u003cbr\u003eLow-Profile Fitment\u003cbr\u003eRetains OEM Parking Sensors\u003cbr\u003eRetains OEM Blind Spot Monitoring\u003cbr\u003eRetains OEM License Plate \u0026amp; Rear Lights\u003cbr\u003e2-Stage Hammer Black Powder Coat\u003cbr\u003eSatin Black Accent Panels\u003cbr\u003eSteel Construction\u003cbr\u003eMade in the USA\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\u003cp\u003eTrimming Required\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eInstall difficulty\u003c\/th\u003e\n\u003ctd\u003e3\/5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eEstimated install time\u003c\/th\u003e\n\u003ctd\u003e3 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (Addictive Desert Designs):\u003c\/strong\u003e 4-6 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003cp\u003e📄 \u003ca href=\"https:\/\/addictivedesertdesigns.com\/cdn\/shop\/files\/ADD-installguide-R76020NA0103.pdf\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":63540094206321,"sku":"R76020NA0103","price":1510.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/R76020NA0103.PTMAIN.jpg?v=1777592306"},{"product_id":"2022-2025-toyota-tundra-black-label-front-bumper","title":"2022-2025 Toyota Tundra Black Label Front Bumper","description":"\u003cp\u003eADD’s Front Bumper provides a low-profile fitment and accent cutouts. The center of the bumper features a 20-inch light bar mount. The bumper follows the factory lines of your vehicle. It is made from American steel, and is finished in a 2-stage hammer black powder coat. The front bumper retains the OEM parking sensors, Toyota Safety Sense, and fog lights. Made in the USA.\u003cbr\u003e\u003cbr\u003e* Please Note: The bumper is not compatible with the Hybrid trim level, and it will not fit the factory front skid plate.\u003cbr\u003e\u003cbr\u003e** Please Note: Trimming is required for installation.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eAggressive Plate Steel Design\u003cbr\u003e(1) 20” LED Light Bar Mount\u003cbr\u003eLow-Profile Fitment\u003cbr\u003eRetains OEM Parking Sensors\u003cbr\u003eRetains TSS Functionality\u003cbr\u003eRetains OEM Fog Lights\u003cbr\u003e2-Stage Hammer Black Powder Coat Finish\u003cbr\u003eSatin Black Accent Panels\u003cbr\u003e3-Piece Design\u003cbr\u003eMade in the USA\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\u003cp\u003eTrimming Required\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eInstall difficulty\u003c\/th\u003e\n\u003ctd\u003e4\/5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eEstimated install time\u003c\/th\u003e\n\u003ctd\u003e4.5 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (Addictive Desert Designs):\u003c\/strong\u003e 4-6 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003cp\u003e📄 \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/ADD-installguide-F760305080103.pdf?v=1738267556\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":63540094271857,"sku":"F760305080103","price":1449.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/F760305080103.PTMAIN.jpg?v=1777592311"},{"product_id":"2022-2025-toyota-tundra-rear-bumper-1","title":"2022-2025 Toyota Tundra Rear Bumper","description":"\u003cp\u003eOur Rear Bumper features a low-profile fitment and two pod light mounts. Our bumper comes in two variations: with two 1-inch thick D-ring mounts and without D-ring mounts. It is made from steel, and is finished in a 2-stage hammer black powder coat. The bumper retains the factory parking sensors and blind spot monitoring. Made in the USA.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eLow-Profile Fitment\u003cbr\u003e(2) Mounts for Baja Designs S2 or RIGID SR-M Pod Lights\u003cbr\u003eRetains OEM Blind Spot Monitoring\u003cbr\u003eRetains OEM Parking Sensors\u003cbr\u003e2-Stage Hammer Black Powder Coated Finish\u003cbr\u003eDurable Steel Construction\u003cbr\u003eMade in the USA\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\u003cp\u003eTrimming Required\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eInstall difficulty\u003c\/th\u003e\n\u003ctd\u003e2\/5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eEstimated install time\u003c\/th\u003e\n\u003ctd\u003e2 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (Rago Fabrication):\u003c\/strong\u003e 1-3 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003cp\u003e📄 \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1220\/2430\/files\/Rago_InstallGuide_R7602850901NA.pdf?v=1747060389\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":63541679686001,"sku":"R7602850901NA","price":1178.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/R7602850901NA_Installed_4.jpg?v=1777597150"},{"product_id":"tundra-overland-series-front-bumper-2nd-gen-2007-2013","title":"Tundra Overland Series Front Bumper \/ 2nd Gen \/ 2007-2013","description":"\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 165lbs without bull bar, 180lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 165lbs without bull bar, 180lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541698822513,"sku":"1400-3107-30-FH","price":1779.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tundra-Overland-Series-Front-Bumper-2nd-Gen-2007-2013.jpg?v=1777597945"},{"product_id":"tundra-overland-series-front-bumper-2nd-gen-2007-2014","title":"Tundra Overland Series Front Bumper \/ 2nd Gen \/ 2007-2013","description":"\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 165lbs without bull bar, 180lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 165lbs without bull bar, 180lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541698855281,"sku":"1400-3107-30-FH-01NA","price":2374.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tundra-Overland-Series-Front-Bumper-2nd-Gen-2007-2013_18daf911-35ab-43dd-bd39-bb9459d355e6.jpg?v=1777597947"},{"product_id":"tundra-overland-series-front-bumper-2nd-gen-2007-2015","title":"Tundra Overland Series Front Bumper \/ 2nd Gen \/ 2007-2013","description":"\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 165lbs without bull bar, 180lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 165lbs without bull bar, 180lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541698920817,"sku":"1400-3107-30-MH","price":1998.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3107-30-MH-01NA.06.jpg?v=1777597950"},{"product_id":"tundra-overland-series-front-bumper-2nd-gen-2007-2016","title":"Tundra Overland Series Front Bumper \/ 2nd Gen \/ 2007-2013","description":"\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 165lbs without bull bar, 180lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 165lbs without bull bar, 180lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541698953585,"sku":"1400-3107-30-MH-01NA","price":1902.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3107-30-MH-01NA.06_f381158d-14e3-4efd-8758-d522e6d211c3.jpg?v=1777597951"},{"product_id":"tundra-overland-series-front-bumper-2nd-gen-2007-2017","title":"Tundra Overland Series Front Bumper \/ 2nd Gen \/ 2007-2013","description":"\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 165lbs without bull bar, 180lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 165lbs without bull bar, 180lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541699182961,"sku":"1400-3107-30-NB","price":1607.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3107-30-NB-01NA.03.jpg?v=1777597951"},{"product_id":"tundra-overland-series-front-bumper-2nd-gen-2007-2018","title":"Tundra Overland Series Front Bumper \/ 2nd Gen \/ 2007-2013","description":"\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 165lbs without bull bar, 180lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 165lbs without bull bar, 180lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541699215729,"sku":"1400-3107-30-NB-01NA","price":1811.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3107-30-NB-01NA.03_48cbe5b8-2fd7-45ef-9f03-467658505586.jpg?v=1777597955"},{"product_id":"tundra-overland-series-front-bumper-2nd-gen-2014-2021","title":"Tundra Overland Series Front Bumper \/ 2nd Gen \/ 2014-2021","description":"\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4\" thick mounting plates and winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFull-height bull bar will work with TSS in TRD Pro grilles only. Bull bar will block the TSS sensor on regular grilles.\u003cbr\u003eMid-height bull bar works with TSS on all models\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4\" thick mounting plates and winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFull-height bull bar will work with TSS in TRD Pro grilles only. Bull bar will block the TSS sensor on regular grilles.\u003cbr\u003eMid-height bull bar works with TSS on all models\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541699314033,"sku":"1400-3114-30-FH","price":1811.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3114-30-FH-01NA.12.png?v=1777597966"},{"product_id":"tundra-overland-series-front-bumper-2nd-gen-2014-2022","title":"Tundra Overland Series Front Bumper \/ 2nd Gen \/ 2014-2021","description":"\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4\" thick mounting plates and winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFull-height bull bar will work with TSS in TRD Pro grilles only. Bull bar will block the TSS sensor on regular grilles.\u003cbr\u003eMid-height bull bar works with TSS on all models\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4\" thick mounting plates and winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFull-height bull bar will work with TSS in TRD Pro grilles only. Bull bar will block the TSS sensor on regular grilles.\u003cbr\u003eMid-height bull bar works with TSS on all models\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541699346801,"sku":"1400-3114-30-MH","price":1709.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3114-30-MH-01NA.02.jpg?v=1777597967"},{"product_id":"tundra-overland-series-front-bumper-2nd-gen-2014-2023","title":"Tundra Overland Series Front Bumper \/ 2nd Gen \/ 2014-2021","description":"\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4\" thick mounting plates and winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFull-height bull bar will work with TSS in TRD Pro grilles only. Bull bar will block the TSS sensor on regular grilles.\u003cbr\u003eMid-height bull bar works with TSS on all models\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4\" thick mounting plates and winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFull-height bull bar will work with TSS in TRD Pro grilles only. Bull bar will block the TSS sensor on regular grilles.\u003cbr\u003eMid-height bull bar works with TSS on all models\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541699379569,"sku":"1400-3114-30-FH-01NA","price":2439.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3114-30-FH-01NA.12_3b824dce-8752-4cf5-8a91-22bde36848ed.png?v=1777597968"},{"product_id":"tundra-overland-series-front-bumper-2nd-gen-2014-2024","title":"Tundra Overland Series Front Bumper \/ 2nd Gen \/ 2014-2021","description":"\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4\" thick mounting plates and winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFull-height bull bar will work with TSS in TRD Pro grilles only. Bull bar will block the TSS sensor on regular grilles.\u003cbr\u003eMid-height bull bar works with TSS on all models\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4\" thick mounting plates and winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFull-height bull bar will work with TSS in TRD Pro grilles only. Bull bar will block the TSS sensor on regular grilles.\u003cbr\u003eMid-height bull bar works with TSS on all models\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541699412337,"sku":"1400-3114-30-MH-01NA","price":1957.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3114-30-MH-01NA.02_382f9dc3-65de-4406-8bd7-4ff579e14554.jpg?v=1777597969"},{"product_id":"tundra-overland-series-front-bumper-2nd-gen-2014-2025","title":"Tundra Overland Series Front Bumper \/ 2nd Gen \/ 2014-2021","description":"\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4\" thick mounting plates and winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFull-height bull bar will work with TSS in TRD Pro grilles only. Bull bar will block the TSS sensor on regular grilles.\u003cbr\u003eMid-height bull bar works with TSS on all models\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4\" thick mounting plates and winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFull-height bull bar will work with TSS in TRD Pro grilles only. Bull bar will block the TSS sensor on regular grilles.\u003cbr\u003eMid-height bull bar works with TSS on all models\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541699477873,"sku":"1400-3114-30-NB","price":1953.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3114-30-NB-01NA.02.jpg?v=1777597977"},{"product_id":"tundra-overland-series-front-bumper-2nd-gen-2014-2026","title":"Tundra Overland Series Front Bumper \/ 2nd Gen \/ 2014-2021","description":"\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4\" thick mounting plates and winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFull-height bull bar will work with TSS in TRD Pro grilles only. Bull bar will block the TSS sensor on regular grilles.\u003cbr\u003eMid-height bull bar works with TSS on all models\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4\" thick mounting plates and winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFull-height bull bar will work with TSS in TRD Pro grilles only. Bull bar will block the TSS sensor on regular grilles.\u003cbr\u003eMid-height bull bar works with TSS on all models\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWorks with TRD Pro skid plate and aftermarket skid plates.\u003cbr\u003eComes with holes for parking sensors.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541699543409,"sku":"1400-3114-30-NB-01NA","price":1866.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3114-30-NB-01NA.02_b0a87d68-69e9-4af6-9826-1f0b88e1bedc.jpg?v=1777597979"},{"product_id":"tundra-overland-series-front-bumper-3rd-gen-2022","title":"Tundra Overland Series Front Bumper \/ 3rd Gen \/ 2022+","description":"\u003cp\u003eRETAINS FULL FUNCTIONALITY OF TOYOTA SAFETY SENSE SYSTEM, park sensors and front mounted camera. (all bull bar options are compatible with TSS). Low-Height bull bar and Mid-Height bull bars will be visible in front mounted camera however, they will not block full view of camera.\u003cbr\u003eTSS RECALIBRATION MAY BE REQUIRED AFTER INSTALLING AFTERMARKET BUMPER. We have had some customers report that their TSS system was requesting a recalibration after installing all of the sensors into the bumper. This sometimes happens when the sensors are moved from their original location on the vehicle to the new bumper.\u003cbr\u003eNOTE: parking sensors need to be oriented correctly per the install video to avoid malfunctioning. C4 fabrication recommends your truck sit level for sensors to be in an optimal position. If your truck has too much forward rake, sensors will be more sensitive and may go off more intermittently.\u003cbr\u003eBumper is designed to fit 40″ single row light bars (specifically designed for Baja Designs S8 light bar). Light cutouts are a standard feature and cannot be removed.\u003cbr\u003eDesigned to fit one pair of Baja Designs Squadron fog lights, OE fog lights cannot be reused.\u003cbr\u003eBumper will fit LP9s on all options except the low bar, but will not come pre-drilled\u003cbr\u003eBumper will require cutting the plastic bumper panels under the headlight on each side and trimming the end of the fender flares to install. (installation video is very detailed and provides step by step instructions)\u003cbr\u003eBumper has holes to reattach factory fender liners\u003cbr\u003eComes with front skid plate that replaces the factory plastic skid plate\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ and 1 1\/2\" diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches that have been verified to fit are WARN VR and ZEON series 10k and 12k size.\u003cbr\u003eDoes not fit Smitty XRC 12k winch\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWeighs 160lbs (no bar), 168lbs (low bullbar), 174lbs (mid height w\/gussets), 182lbs (full bull bar with headlight hoops)\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eRETAINS FULL FUNCTIONALITY OF TOYOTA SAFETY SENSE SYSTEM, park sensors and front mounted camera. (all bull bar options are compatible with TSS). Low-Height bull bar and Mid-Height bull bars will be visible in front mounted camera however, they will not block full view of camera.\u003cbr\u003eTSS RECALIBRATION MAY BE REQUIRED AFTER INSTALLING AFTERMARKET BUMPER. We have had some customers report that their TSS system was requesting a recalibration after installing all of the sensors into the bumper. This sometimes happens when the sensors are moved from their original location on the vehicle to the new bumper.\u003cbr\u003eNOTE: parking sensors need to be oriented correctly per the install video to avoid malfunctioning. C4 fabrication recommends your truck sit level for sensors to be in an optimal position. If your truck has too much forward rake, sensors will be more sensitive and may go off more intermittently.\u003cbr\u003eBumper is designed to fit 40″ single row light bars (specifically designed for Baja Designs S8 light bar). Light cutouts are a standard feature and cannot be removed.\u003cbr\u003eDesigned to fit one pair of Baja Designs Squadron fog lights, OE fog lights cannot be reused.\u003cbr\u003eBumper will fit LP9s on all options except the low bar, but will not come pre-drilled\u003cbr\u003eBumper will require cutting the plastic bumper panels under the headlight on each side and trimming the end of the fender flares to install. (installation video is very detailed and provides step by step instructions)\u003cbr\u003eBumper has holes to reattach factory fender liners\u003cbr\u003eComes with front skid plate that replaces the factory plastic skid plate\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ and 1 1\/2\" diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches that have been verified to fit are WARN VR and ZEON series 10k and 12k size.\u003cbr\u003eDoes not fit Smitty XRC 12k winch\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWeighs 160lbs (no bar), 168lbs (low bullbar), 174lbs (mid height w\/gussets), 182lbs (full bull bar with headlight hoops)\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/tb3z6cbtfe8\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541699608945,"sku":"1400-3122-FHH","price":2542.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3122-FHH-01NA.05.jpg?v=1777597983"},{"product_id":"tundra-overland-series-front-bumper-3rd-gen-2023","title":"Tundra Overland Series Front Bumper \/ 3rd Gen \/ 2022+","description":"\u003cp\u003eRETAINS FULL FUNCTIONALITY OF TOYOTA SAFETY SENSE SYSTEM, park sensors and front mounted camera. (all bull bar options are compatible with TSS). Low-Height bull bar and Mid-Height bull bars will be visible in front mounted camera however, they will not block full view of camera.\u003cbr\u003eTSS RECALIBRATION MAY BE REQUIRED AFTER INSTALLING AFTERMARKET BUMPER. We have had some customers report that their TSS system was requesting a recalibration after installing all of the sensors into the bumper. This sometimes happens when the sensors are moved from their original location on the vehicle to the new bumper.\u003cbr\u003eNOTE: parking sensors need to be oriented correctly per the install video to avoid malfunctioning. C4 fabrication recommends your truck sit level for sensors to be in an optimal position. If your truck has too much forward rake, sensors will be more sensitive and may go off more intermittently.\u003cbr\u003eBumper is designed to fit 40″ single row light bars (specifically designed for Baja Designs S8 light bar). Light cutouts are a standard feature and cannot be removed.\u003cbr\u003eDesigned to fit one pair of Baja Designs Squadron fog lights, OE fog lights cannot be reused.\u003cbr\u003eBumper will fit LP9s on all options except the low bar, but will not come pre-drilled\u003cbr\u003eBumper will require cutting the plastic bumper panels under the headlight on each side and trimming the end of the fender flares to install. (installation video is very detailed and provides step by step instructions)\u003cbr\u003eBumper has holes to reattach factory fender liners\u003cbr\u003eComes with front skid plate that replaces the factory plastic skid plate\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ and 1 1\/2\" diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches that have been verified to fit are WARN VR and ZEON series 10k and 12k size.\u003cbr\u003eDoes not fit Smitty XRC 12k winch\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWeighs 160lbs (no bar), 168lbs (low bullbar), 174lbs (mid height w\/gussets), 182lbs (full bull bar with headlight hoops)\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eRETAINS FULL FUNCTIONALITY OF TOYOTA SAFETY SENSE SYSTEM, park sensors and front mounted camera. (all bull bar options are compatible with TSS). Low-Height bull bar and Mid-Height bull bars will be visible in front mounted camera however, they will not block full view of camera.\u003cbr\u003eTSS RECALIBRATION MAY BE REQUIRED AFTER INSTALLING AFTERMARKET BUMPER. We have had some customers report that their TSS system was requesting a recalibration after installing all of the sensors into the bumper. This sometimes happens when the sensors are moved from their original location on the vehicle to the new bumper.\u003cbr\u003eNOTE: parking sensors need to be oriented correctly per the install video to avoid malfunctioning. C4 fabrication recommends your truck sit level for sensors to be in an optimal position. If your truck has too much forward rake, sensors will be more sensitive and may go off more intermittently.\u003cbr\u003eBumper is designed to fit 40″ single row light bars (specifically designed for Baja Designs S8 light bar). Light cutouts are a standard feature and cannot be removed.\u003cbr\u003eDesigned to fit one pair of Baja Designs Squadron fog lights, OE fog lights cannot be reused.\u003cbr\u003eBumper will fit LP9s on all options except the low bar, but will not come pre-drilled\u003cbr\u003eBumper will require cutting the plastic bumper panels under the headlight on each side and trimming the end of the fender flares to install. (installation video is very detailed and provides step by step instructions)\u003cbr\u003eBumper has holes to reattach factory fender liners\u003cbr\u003eComes with front skid plate that replaces the factory plastic skid plate\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ and 1 1\/2\" diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches that have been verified to fit are WARN VR and ZEON series 10k and 12k size.\u003cbr\u003eDoes not fit Smitty XRC 12k winch\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWeighs 160lbs (no bar), 168lbs (low bullbar), 174lbs (mid height w\/gussets), 182lbs (full bull bar with headlight hoops)\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/tb3z6cbtfe9\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541699674481,"sku":"1400-3122-FHH-01NA","price":2410.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3122-FHH-01NA.05_fcfc8d6d-7e36-48de-9666-49021df1de5d.jpg?v=1777597986"},{"product_id":"tundra-overland-series-front-bumper-3rd-gen-2024","title":"Tundra Overland Series Front Bumper \/ 3rd Gen \/ 2022+","description":"\u003cp\u003eRETAINS FULL FUNCTIONALITY OF TOYOTA SAFETY SENSE SYSTEM, park sensors and front mounted camera. (all bull bar options are compatible with TSS). Low-Height bull bar and Mid-Height bull bars will be visible in front mounted camera however, they will not block full view of camera.\u003cbr\u003eTSS RECALIBRATION MAY BE REQUIRED AFTER INSTALLING AFTERMARKET BUMPER. We have had some customers report that their TSS system was requesting a recalibration after installing all of the sensors into the bumper. This sometimes happens when the sensors are moved from their original location on the vehicle to the new bumper.\u003cbr\u003eNOTE: parking sensors need to be oriented correctly per the install video to avoid malfunctioning. C4 fabrication recommends your truck sit level for sensors to be in an optimal position. If your truck has too much forward rake, sensors will be more sensitive and may go off more intermittently.\u003cbr\u003eBumper is designed to fit 40″ single row light bars (specifically designed for Baja Designs S8 light bar). Light cutouts are a standard feature and cannot be removed.\u003cbr\u003eDesigned to fit one pair of Baja Designs Squadron fog lights, OE fog lights cannot be reused.\u003cbr\u003eBumper will fit LP9s on all options except the low bar, but will not come pre-drilled\u003cbr\u003eBumper will require cutting the plastic bumper panels under the headlight on each side and trimming the end of the fender flares to install. (installation video is very detailed and provides step by step instructions)\u003cbr\u003eBumper has holes to reattach factory fender liners\u003cbr\u003eComes with front skid plate that replaces the factory plastic skid plate\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ and 1 1\/2\" diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches that have been verified to fit are WARN VR and ZEON series 10k and 12k size.\u003cbr\u003eDoes not fit Smitty XRC 12k winch\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWeighs 160lbs (no bar), 168lbs (low bullbar), 174lbs (mid height w\/gussets), 182lbs (full bull bar with headlight hoops)\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eRETAINS FULL FUNCTIONALITY OF TOYOTA SAFETY SENSE SYSTEM, park sensors and front mounted camera. (all bull bar options are compatible with TSS). Low-Height bull bar and Mid-Height bull bars will be visible in front mounted camera however, they will not block full view of camera.\u003cbr\u003eTSS RECALIBRATION MAY BE REQUIRED AFTER INSTALLING AFTERMARKET BUMPER. We have had some customers report that their TSS system was requesting a recalibration after installing all of the sensors into the bumper. This sometimes happens when the sensors are moved from their original location on the vehicle to the new bumper.\u003cbr\u003eNOTE: parking sensors need to be oriented correctly per the install video to avoid malfunctioning. C4 fabrication recommends your truck sit level for sensors to be in an optimal position. If your truck has too much forward rake, sensors will be more sensitive and may go off more intermittently.\u003cbr\u003eBumper is designed to fit 40″ single row light bars (specifically designed for Baja Designs S8 light bar). Light cutouts are a standard feature and cannot be removed.\u003cbr\u003eDesigned to fit one pair of Baja Designs Squadron fog lights, OE fog lights cannot be reused.\u003cbr\u003eBumper will fit LP9s on all options except the low bar, but will not come pre-drilled\u003cbr\u003eBumper will require cutting the plastic bumper panels under the headlight on each side and trimming the end of the fender flares to install. (installation video is very detailed and provides step by step instructions)\u003cbr\u003eBumper has holes to reattach factory fender liners\u003cbr\u003eComes with front skid plate that replaces the factory plastic skid plate\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ and 1 1\/2\" diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches that have been verified to fit are WARN VR and ZEON series 10k and 12k size.\u003cbr\u003eDoes not fit Smitty XRC 12k winch\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWeighs 160lbs (no bar), 168lbs (low bullbar), 174lbs (mid height w\/gussets), 182lbs (full bull bar with headlight hoops)\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/tb3z6cbtfe10\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541699740017,"sku":"1400-3122-LB","price":1898.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tundra-Overland-Series-Front-Bumper-3rd-Gen-2022-2025.jpg?v=1777597992"},{"product_id":"tundra-overland-series-front-bumper-3rd-gen-2025","title":"Tundra Overland Series Front Bumper \/ 3rd Gen \/ 2022+","description":"\u003cp\u003eRETAINS FULL FUNCTIONALITY OF TOYOTA SAFETY SENSE SYSTEM, park sensors and front mounted camera. (all bull bar options are compatible with TSS). Low-Height bull bar and Mid-Height bull bars will be visible in front mounted camera however, they will not block full view of camera.\u003cbr\u003eTSS RECALIBRATION MAY BE REQUIRED AFTER INSTALLING AFTERMARKET BUMPER. We have had some customers report that their TSS system was requesting a recalibration after installing all of the sensors into the bumper. This sometimes happens when the sensors are moved from their original location on the vehicle to the new bumper.\u003cbr\u003eNOTE: parking sensors need to be oriented correctly per the install video to avoid malfunctioning. C4 fabrication recommends your truck sit level for sensors to be in an optimal position. If your truck has too much forward rake, sensors will be more sensitive and may go off more intermittently.\u003cbr\u003eBumper is designed to fit 40″ single row light bars (specifically designed for Baja Designs S8 light bar). Light cutouts are a standard feature and cannot be removed.\u003cbr\u003eDesigned to fit one pair of Baja Designs Squadron fog lights, OE fog lights cannot be reused.\u003cbr\u003eBumper will fit LP9s on all options except the low bar, but will not come pre-drilled\u003cbr\u003eBumper will require cutting the plastic bumper panels under the headlight on each side and trimming the end of the fender flares to install. (installation video is very detailed and provides step by step instructions)\u003cbr\u003eBumper has holes to reattach factory fender liners\u003cbr\u003eComes with front skid plate that replaces the factory plastic skid plate\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ and 1 1\/2\" diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches that have been verified to fit are WARN VR and ZEON series 10k and 12k size.\u003cbr\u003eDoes not fit Smitty XRC 12k winch\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWeighs 160lbs (no bar), 168lbs (low bullbar), 174lbs (mid height w\/gussets), 182lbs (full bull bar with headlight hoops)\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eRETAINS FULL FUNCTIONALITY OF TOYOTA SAFETY SENSE SYSTEM, park sensors and front mounted camera. (all bull bar options are compatible with TSS). Low-Height bull bar and Mid-Height bull bars will be visible in front mounted camera however, they will not block full view of camera.\u003cbr\u003eTSS RECALIBRATION MAY BE REQUIRED AFTER INSTALLING AFTERMARKET BUMPER. We have had some customers report that their TSS system was requesting a recalibration after installing all of the sensors into the bumper. This sometimes happens when the sensors are moved from their original location on the vehicle to the new bumper.\u003cbr\u003eNOTE: parking sensors need to be oriented correctly per the install video to avoid malfunctioning. C4 fabrication recommends your truck sit level for sensors to be in an optimal position. If your truck has too much forward rake, sensors will be more sensitive and may go off more intermittently.\u003cbr\u003eBumper is designed to fit 40″ single row light bars (specifically designed for Baja Designs S8 light bar). Light cutouts are a standard feature and cannot be removed.\u003cbr\u003eDesigned to fit one pair of Baja Designs Squadron fog lights, OE fog lights cannot be reused.\u003cbr\u003eBumper will fit LP9s on all options except the low bar, but will not come pre-drilled\u003cbr\u003eBumper will require cutting the plastic bumper panels under the headlight on each side and trimming the end of the fender flares to install. (installation video is very detailed and provides step by step instructions)\u003cbr\u003eBumper has holes to reattach factory fender liners\u003cbr\u003eComes with front skid plate that replaces the factory plastic skid plate\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ and 1 1\/2\" diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches that have been verified to fit are WARN VR and ZEON series 10k and 12k size.\u003cbr\u003eDoes not fit Smitty XRC 12k winch\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWeighs 160lbs (no bar), 168lbs (low bullbar), 174lbs (mid height w\/gussets), 182lbs (full bull bar with headlight hoops)\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/tb3z6cbtfe11\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541699805553,"sku":"1400-3122-LB-01NA","price":2547.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tundra-Overland-Series-Front-Bumper-3rd-Gen-2022-2025_ad2ec81a-f7b2-4b03-ad0c-bd7f74607f18.jpg?v=1777597994"},{"product_id":"tundra-overland-series-front-bumper-3rd-gen-2026","title":"Tundra Overland Series Front Bumper \/ 3rd Gen \/ 2022+","description":"\u003cp\u003eRETAINS FULL FUNCTIONALITY OF TOYOTA SAFETY SENSE SYSTEM, park sensors and front mounted camera. (all bull bar options are compatible with TSS). Low-Height bull bar and Mid-Height bull bars will be visible in front mounted camera however, they will not block full view of camera.\u003cbr\u003eTSS RECALIBRATION MAY BE REQUIRED AFTER INSTALLING AFTERMARKET BUMPER. We have had some customers report that their TSS system was requesting a recalibration after installing all of the sensors into the bumper. This sometimes happens when the sensors are moved from their original location on the vehicle to the new bumper.\u003cbr\u003eNOTE: parking sensors need to be oriented correctly per the install video to avoid malfunctioning. C4 fabrication recommends your truck sit level for sensors to be in an optimal position. If your truck has too much forward rake, sensors will be more sensitive and may go off more intermittently.\u003cbr\u003eBumper is designed to fit 40″ single row light bars (specifically designed for Baja Designs S8 light bar). Light cutouts are a standard feature and cannot be removed.\u003cbr\u003eDesigned to fit one pair of Baja Designs Squadron fog lights, OE fog lights cannot be reused.\u003cbr\u003eBumper will fit LP9s on all options except the low bar, but will not come pre-drilled\u003cbr\u003eBumper will require cutting the plastic bumper panels under the headlight on each side and trimming the end of the fender flares to install. (installation video is very detailed and provides step by step instructions)\u003cbr\u003eBumper has holes to reattach factory fender liners\u003cbr\u003eComes with front skid plate that replaces the factory plastic skid plate\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ and 1 1\/2\" diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches that have been verified to fit are WARN VR and ZEON series 10k and 12k size.\u003cbr\u003eDoes not fit Smitty XRC 12k winch\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWeighs 160lbs (no bar), 168lbs (low bullbar), 174lbs (mid height w\/gussets), 182lbs (full bull bar with headlight hoops)\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eRETAINS FULL FUNCTIONALITY OF TOYOTA SAFETY SENSE SYSTEM, park sensors and front mounted camera. (all bull bar options are compatible with TSS). Low-Height bull bar and Mid-Height bull bars will be visible in front mounted camera however, they will not block full view of camera.\u003cbr\u003eTSS RECALIBRATION MAY BE REQUIRED AFTER INSTALLING AFTERMARKET BUMPER. We have had some customers report that their TSS system was requesting a recalibration after installing all of the sensors into the bumper. This sometimes happens when the sensors are moved from their original location on the vehicle to the new bumper.\u003cbr\u003eNOTE: parking sensors need to be oriented correctly per the install video to avoid malfunctioning. C4 fabrication recommends your truck sit level for sensors to be in an optimal position. If your truck has too much forward rake, sensors will be more sensitive and may go off more intermittently.\u003cbr\u003eBumper is designed to fit 40″ single row light bars (specifically designed for Baja Designs S8 light bar). Light cutouts are a standard feature and cannot be removed.\u003cbr\u003eDesigned to fit one pair of Baja Designs Squadron fog lights, OE fog lights cannot be reused.\u003cbr\u003eBumper will fit LP9s on all options except the low bar, but will not come pre-drilled\u003cbr\u003eBumper will require cutting the plastic bumper panels under the headlight on each side and trimming the end of the fender flares to install. (installation video is very detailed and provides step by step instructions)\u003cbr\u003eBumper has holes to reattach factory fender liners\u003cbr\u003eComes with front skid plate that replaces the factory plastic skid plate\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ and 1 1\/2\" diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches that have been verified to fit are WARN VR and ZEON series 10k and 12k size.\u003cbr\u003eDoes not fit Smitty XRC 12k winch\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWeighs 160lbs (no bar), 168lbs (low bullbar), 174lbs (mid height w\/gussets), 182lbs (full bull bar with headlight hoops)\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/tb3z6cbtfe12\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541699871089,"sku":"1400-3122-MHG","price":2369.52,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3122-MHG.02.jpg?v=1777598000"},{"product_id":"tundra-overland-series-front-bumper-3rd-gen-2027","title":"Tundra Overland Series Front Bumper \/ 3rd Gen \/ 2022+","description":"\u003cp\u003eRETAINS FULL FUNCTIONALITY OF TOYOTA SAFETY SENSE SYSTEM, park sensors and front mounted camera. (all bull bar options are compatible with TSS). Low-Height bull bar and Mid-Height bull bars will be visible in front mounted camera however, they will not block full view of camera.\u003cbr\u003eTSS RECALIBRATION MAY BE REQUIRED AFTER INSTALLING AFTERMARKET BUMPER. We have had some customers report that their TSS system was requesting a recalibration after installing all of the sensors into the bumper. This sometimes happens when the sensors are moved from their original location on the vehicle to the new bumper.\u003cbr\u003eNOTE: parking sensors need to be oriented correctly per the install video to avoid malfunctioning. C4 fabrication recommends your truck sit level for sensors to be in an optimal position. If your truck has too much forward rake, sensors will be more sensitive and may go off more intermittently.\u003cbr\u003eBumper is designed to fit 40″ single row light bars (specifically designed for Baja Designs S8 light bar). Light cutouts are a standard feature and cannot be removed.\u003cbr\u003eDesigned to fit one pair of Baja Designs Squadron fog lights, OE fog lights cannot be reused.\u003cbr\u003eBumper will fit LP9s on all options except the low bar, but will not come pre-drilled\u003cbr\u003eBumper will require cutting the plastic bumper panels under the headlight on each side and trimming the end of the fender flares to install. (installation video is very detailed and provides step by step instructions)\u003cbr\u003eBumper has holes to reattach factory fender liners\u003cbr\u003eComes with front skid plate that replaces the factory plastic skid plate\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ and 1 1\/2\" diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches that have been verified to fit are WARN VR and ZEON series 10k and 12k size.\u003cbr\u003eDoes not fit Smitty XRC 12k winch\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWeighs 160lbs (no bar), 168lbs (low bullbar), 174lbs (mid height w\/gussets), 182lbs (full bull bar with headlight hoops)\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eRETAINS FULL FUNCTIONALITY OF TOYOTA SAFETY SENSE SYSTEM, park sensors and front mounted camera. (all bull bar options are compatible with TSS). Low-Height bull bar and Mid-Height bull bars will be visible in front mounted camera however, they will not block full view of camera.\u003cbr\u003eTSS RECALIBRATION MAY BE REQUIRED AFTER INSTALLING AFTERMARKET BUMPER. We have had some customers report that their TSS system was requesting a recalibration after installing all of the sensors into the bumper. This sometimes happens when the sensors are moved from their original location on the vehicle to the new bumper.\u003cbr\u003eNOTE: parking sensors need to be oriented correctly per the install video to avoid malfunctioning. C4 fabrication recommends your truck sit level for sensors to be in an optimal position. If your truck has too much forward rake, sensors will be more sensitive and may go off more intermittently.\u003cbr\u003eBumper is designed to fit 40″ single row light bars (specifically designed for Baja Designs S8 light bar). Light cutouts are a standard feature and cannot be removed.\u003cbr\u003eDesigned to fit one pair of Baja Designs Squadron fog lights, OE fog lights cannot be reused.\u003cbr\u003eBumper will fit LP9s on all options except the low bar, but will not come pre-drilled\u003cbr\u003eBumper will require cutting the plastic bumper panels under the headlight on each side and trimming the end of the fender flares to install. (installation video is very detailed and provides step by step instructions)\u003cbr\u003eBumper has holes to reattach factory fender liners\u003cbr\u003eComes with front skid plate that replaces the factory plastic skid plate\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ and 1 1\/2\" diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches that have been verified to fit are WARN VR and ZEON series 10k and 12k size.\u003cbr\u003eDoes not fit Smitty XRC 12k winch\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWeighs 160lbs (no bar), 168lbs (low bullbar), 174lbs (mid height w\/gussets), 182lbs (full bull bar with headlight hoops)\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/tb3z6cbtfe13\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541699903857,"sku":"1400-3122-MHG-01NA","price":2228.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3122-MHG.02_bb0e2496-14e1-4abe-890a-0b5d7e8a1b34.jpg?v=1777598001"},{"product_id":"tundra-overland-series-front-bumper-3rd-gen-2028","title":"Tundra Overland Series Front Bumper \/ 3rd Gen \/ 2022+","description":"\u003cp\u003eRETAINS FULL FUNCTIONALITY OF TOYOTA SAFETY SENSE SYSTEM, park sensors and front mounted camera. (all bull bar options are compatible with TSS). Low-Height bull bar and Mid-Height bull bars will be visible in front mounted camera however, they will not block full view of camera.\u003cbr\u003eTSS RECALIBRATION MAY BE REQUIRED AFTER INSTALLING AFTERMARKET BUMPER. We have had some customers report that their TSS system was requesting a recalibration after installing all of the sensors into the bumper. This sometimes happens when the sensors are moved from their original location on the vehicle to the new bumper.\u003cbr\u003eNOTE: parking sensors need to be oriented correctly per the install video to avoid malfunctioning. C4 fabrication recommends your truck sit level for sensors to be in an optimal position. If your truck has too much forward rake, sensors will be more sensitive and may go off more intermittently.\u003cbr\u003eBumper is designed to fit 40″ single row light bars (specifically designed for Baja Designs S8 light bar). Light cutouts are a standard feature and cannot be removed.\u003cbr\u003eDesigned to fit one pair of Baja Designs Squadron fog lights, OE fog lights cannot be reused.\u003cbr\u003eBumper will fit LP9s on all options except the low bar, but will not come pre-drilled\u003cbr\u003eBumper will require cutting the plastic bumper panels under the headlight on each side and trimming the end of the fender flares to install. (installation video is very detailed and provides step by step instructions)\u003cbr\u003eBumper has holes to reattach factory fender liners\u003cbr\u003eComes with front skid plate that replaces the factory plastic skid plate\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ and 1 1\/2\" diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches that have been verified to fit are WARN VR and ZEON series 10k and 12k size.\u003cbr\u003eDoes not fit Smitty XRC 12k winch\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWeighs 160lbs (no bar), 168lbs (low bullbar), 174lbs (mid height w\/gussets), 182lbs (full bull bar with headlight hoops)\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eRETAINS FULL FUNCTIONALITY OF TOYOTA SAFETY SENSE SYSTEM, park sensors and front mounted camera. (all bull bar options are compatible with TSS). Low-Height bull bar and Mid-Height bull bars will be visible in front mounted camera however, they will not block full view of camera.\u003cbr\u003eTSS RECALIBRATION MAY BE REQUIRED AFTER INSTALLING AFTERMARKET BUMPER. We have had some customers report that their TSS system was requesting a recalibration after installing all of the sensors into the bumper. This sometimes happens when the sensors are moved from their original location on the vehicle to the new bumper.\u003cbr\u003eNOTE: parking sensors need to be oriented correctly per the install video to avoid malfunctioning. C4 fabrication recommends your truck sit level for sensors to be in an optimal position. If your truck has too much forward rake, sensors will be more sensitive and may go off more intermittently.\u003cbr\u003eBumper is designed to fit 40″ single row light bars (specifically designed for Baja Designs S8 light bar). Light cutouts are a standard feature and cannot be removed.\u003cbr\u003eDesigned to fit one pair of Baja Designs Squadron fog lights, OE fog lights cannot be reused.\u003cbr\u003eBumper will fit LP9s on all options except the low bar, but will not come pre-drilled\u003cbr\u003eBumper will require cutting the plastic bumper panels under the headlight on each side and trimming the end of the fender flares to install. (installation video is very detailed and provides step by step instructions)\u003cbr\u003eBumper has holes to reattach factory fender liners\u003cbr\u003eComes with front skid plate that replaces the factory plastic skid plate\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ and 1 1\/2\" diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches that have been verified to fit are WARN VR and ZEON series 10k and 12k size.\u003cbr\u003eDoes not fit Smitty XRC 12k winch\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWeighs 160lbs (no bar), 168lbs (low bullbar), 174lbs (mid height w\/gussets), 182lbs (full bull bar with headlight hoops)\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/tb3z6cbtfe14\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541699969393,"sku":"1400-3122-NB","price":1807.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3122-NB.01.jpg?v=1777598001"},{"product_id":"tundra-overland-series-front-bumper-3rd-gen-2029","title":"Tundra Overland Series Front Bumper \/ 3rd Gen \/ 2022+","description":"\u003cp\u003eRETAINS FULL FUNCTIONALITY OF TOYOTA SAFETY SENSE SYSTEM, park sensors and front mounted camera. (all bull bar options are compatible with TSS). Low-Height bull bar and Mid-Height bull bars will be visible in front mounted camera however, they will not block full view of camera.\u003cbr\u003eTSS RECALIBRATION MAY BE REQUIRED AFTER INSTALLING AFTERMARKET BUMPER. We have had some customers report that their TSS system was requesting a recalibration after installing all of the sensors into the bumper. This sometimes happens when the sensors are moved from their original location on the vehicle to the new bumper.\u003cbr\u003eNOTE: parking sensors need to be oriented correctly per the install video to avoid malfunctioning. C4 fabrication recommends your truck sit level for sensors to be in an optimal position. If your truck has too much forward rake, sensors will be more sensitive and may go off more intermittently.\u003cbr\u003eBumper is designed to fit 40″ single row light bars (specifically designed for Baja Designs S8 light bar). Light cutouts are a standard feature and cannot be removed.\u003cbr\u003eDesigned to fit one pair of Baja Designs Squadron fog lights, OE fog lights cannot be reused.\u003cbr\u003eBumper will fit LP9s on all options except the low bar, but will not come pre-drilled\u003cbr\u003eBumper will require cutting the plastic bumper panels under the headlight on each side and trimming the end of the fender flares to install. (installation video is very detailed and provides step by step instructions)\u003cbr\u003eBumper has holes to reattach factory fender liners\u003cbr\u003eComes with front skid plate that replaces the factory plastic skid plate\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ and 1 1\/2\" diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches that have been verified to fit are WARN VR and ZEON series 10k and 12k size.\u003cbr\u003eDoes not fit Smitty XRC 12k winch\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWeighs 160lbs (no bar), 168lbs (low bullbar), 174lbs (mid height w\/gussets), 182lbs (full bull bar with headlight hoops)\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eRETAINS FULL FUNCTIONALITY OF TOYOTA SAFETY SENSE SYSTEM, park sensors and front mounted camera. (all bull bar options are compatible with TSS). Low-Height bull bar and Mid-Height bull bars will be visible in front mounted camera however, they will not block full view of camera.\u003cbr\u003eTSS RECALIBRATION MAY BE REQUIRED AFTER INSTALLING AFTERMARKET BUMPER. We have had some customers report that their TSS system was requesting a recalibration after installing all of the sensors into the bumper. This sometimes happens when the sensors are moved from their original location on the vehicle to the new bumper.\u003cbr\u003eNOTE: parking sensors need to be oriented correctly per the install video to avoid malfunctioning. C4 fabrication recommends your truck sit level for sensors to be in an optimal position. If your truck has too much forward rake, sensors will be more sensitive and may go off more intermittently.\u003cbr\u003eBumper is designed to fit 40″ single row light bars (specifically designed for Baja Designs S8 light bar). Light cutouts are a standard feature and cannot be removed.\u003cbr\u003eDesigned to fit one pair of Baja Designs Squadron fog lights, OE fog lights cannot be reused.\u003cbr\u003eBumper will fit LP9s on all options except the low bar, but will not come pre-drilled\u003cbr\u003eBumper will require cutting the plastic bumper panels under the headlight on each side and trimming the end of the fender flares to install. (installation video is very detailed and provides step by step instructions)\u003cbr\u003eBumper has holes to reattach factory fender liners\u003cbr\u003eComes with front skid plate that replaces the factory plastic skid plate\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates and 1\/4″ thick winch plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ and 1 1\/2\" diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches that have been verified to fit are WARN VR and ZEON series 10k and 12k size.\u003cbr\u003eDoes not fit Smitty XRC 12k winch\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eWeighs 160lbs (no bar), 168lbs (low bullbar), 174lbs (mid height w\/gussets), 182lbs (full bull bar with headlight hoops)\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/tb3z6cbtfe15\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700002161,"sku":"1400-3122-NB-01NA","price":2047.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3122-NB.01_0b8e5d8c-7ff8-4145-8c63-b8c63168377f.jpg?v=1777598002"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2013","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2013","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700100465,"sku":"1400-3207-30-FH-NP","price":1717.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3207-30-FH-NP-01NA.08.jpg?v=1777598008"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2014","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2013","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700133233,"sku":"1400-3207-30-FH-NP-01NA","price":2331.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3207-30-FH-NP-01NA.08_b78e2e1b-0a5f-420a-92e7-ab7af54b8cc9.jpg?v=1777598009"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2015","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2013","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700264305,"sku":"1400-3207-30-FH-NP-W","price":1790.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3207-30-FH-NP-W-01NA.08.jpg?v=1777598015"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2016","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2013","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700297073,"sku":"1400-3207-30-FH-NP-W-01NA","price":1957.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3207-30-FH-NP-W-01NA.08_1cebf283-069f-4eec-8c62-d45d464c5009.jpg?v=1777598017"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2017","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2013","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700329841,"sku":"1400-3207-30-FH-PS","price":1790.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3207-30-FH-PS-01NA.07.jpg?v=1777598025"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2018","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2013","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700362609,"sku":"1400-3207-30-FH-PS-01NA","price":2331.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3207-30-FH-PS-01NA.07_b5d2d079-c0ab-49aa-9c60-500440af4740.jpg?v=1777598026"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2019","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2013","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700395377,"sku":"1400-3207-30-FH-PS-W","price":1862.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3207-30-FH-PS-W-01NA.08.jpg?v=1777598031"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2020","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2013","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700493681,"sku":"1400-3207-30-FH-PS-W-01NA","price":2083.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1400-3207-30-FH-PS-W-01NA.08_8cba0ca4-0745-458c-8bbb-80ff7609751f.jpg?v=1777598034"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2021","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2013","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700526449,"sku":"1400-3207-30-MH-NP","price":1618.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tundra-Hybrid-Front-Bumper-2nd-gen-2007-2013.jpg?v=1777598040"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2022","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2013","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700559217,"sku":"1400-3207-30-MH-NP-01NA","price":2158.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tundra-Hybrid-Front-Bumper-2nd-gen-2007-2013_f08788a6-84d7-48be-9407-e26430ccb6b6.jpg?v=1777598041"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2023","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2013","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700755825,"sku":"1400-3207-30-MH-NP-W","price":2014.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tundra-Hybrid-Front-Bumper-2nd-gen-2007-2013_013e4ad5-cd48-4c41-b23b-6f0fb84a1703.jpg?v=1777598044"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2024","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2013","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700788593,"sku":"1400-3207-30-MH-NP-W-01NA","price":1902.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tundra-Hybrid-Front-Bumper-2nd-gen-2007-2013_734e41c5-65e7-40a8-967e-68bf8c61b0ad.jpg?v=1777598044"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2025","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2013","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700821361,"sku":"1400-3207-30-MH-PS","price":1690.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tundra-Hybrid-Front-Bumper-2nd-gen-2007-2013_7cd21497-3f45-4fd3-bdea-520dd9897cb1.jpg?v=1777598047"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2026","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2013","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700854129,"sku":"1400-3207-30-MH-PS-01NA","price":1902.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tundra-Hybrid-Front-Bumper-2nd-gen-2007-2013_fd75b048-e57c-409a-b86b-79c21227990f.jpg?v=1777598048"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2027","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2013","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700886897,"sku":"1400-3207-30-MH-PS-W","price":1763.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tundra-Hybrid-Front-Bumper-2nd-gen-2007-2013_e11cbc18-4112-4ac7-a2bb-fc35adba2a12.jpg?v=1777598048"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2028","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2013","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700919665,"sku":"1400-3207-30-NB-NP","price":1550.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tundra-Hybrid-Front-Bumper-2nd-gen-2007-2013_7e4c0c1d-e9aa-4e34-9978-2d27ceeda4c6.jpg?v=1777598050"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2029","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2013","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700952433,"sku":"1400-3207-30-NB-NP-01NA","price":1775.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tundra-Hybrid-Front-Bumper-2nd-gen-2007-2013_cf77e5b8-2c6e-46fa-8f9c-2f7568d3cc41.jpg?v=1777598050"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2030","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2014","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541700985201,"sku":"1400-3207-30-NB-NP-W","price":1622.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tundra-Hybrid-Front-Bumper-2nd-gen-2007-2013_7274dac9-e00c-4cea-bcf7-403ca36fc836.jpg?v=1777598052"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2031","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2014","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541701017969,"sku":"1400-3207-30-NB-NP-W-01NA","price":2158.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tundra-Hybrid-Front-Bumper-2nd-gen-2007-2013_4cd55ad3-5cd6-4640-8458-f06aaae00b2f.jpg?v=1777598052"},{"product_id":"tundra-hybrid-front-bumper-2nd-gen-2007-2032","title":"Tundra Hybrid Front Bumper \/ 2nd gen \/ 2007-2015","description":"\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eThe 2007-2013 Tundra Hybrid bumper is a unique combination of a plate steel center with round tube on the sides. This design allows you to achieve a “lighter” look while gaining the ability to mount a winch, LED light bar and multiple combinations of fog lighting in the tube area.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBumper offers more clearance for better approach angles and makes it easier to fit larger tires.\u003cbr\u003eCenter portion is made from 3\/16″ laser cut P\u0026amp;O steel with 3\/8″ thick mounting plates And 1\/4″ winch mounting plate.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eTube portions are .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper works with TRD Pro skid and aftermarket skids.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eBumper comes pre-drilled for a pair of LP9 or LP6 lights to mount on top of the bumper in front of the grille. The LP9 lights will work with the full-height bull bar as well as no bull bar.\u003cbr\u003eWeighs 150lbs without bull bar, 175lbs with full height bull bar.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003ePlease Note: If you have fiberglass wide fenders, please shop this bumper listing instead.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/yp3d9ULqNKA\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541701050737,"sku":"1400-3207-30-NB-PS","price":1622.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tundra-Hybrid-Front-Bumper-2nd-gen-2007-2013_1b3e414e-d5e9-4576-a6a7-28ecd2a30190.jpg?v=1777598054"}],"url":"https:\/\/wrench-lab.com\/collections\/o-bumpers-toyota-tundra.oembed","provider":"WrenchLab","version":"1.0","type":"link"}