{"title":"Bumpers — Toyota Tacoma","description":"","products":[{"product_id":"2024-2025-toyota-tacoma-spec-series-front-bumper","title":"2024-2025 Toyota Tacoma Spec Series Front Bumper","description":"\u003cp\u003eThe Spec Series Front Bumper for the 2024–2025 Tacoma improves clearance and protection with a hidden winch mount, 1” D-ring mounts, light bar and pod mounts, and a skid plate from bumper to cross member. It retains factory sensors, has a micro-texture black powder coat with a satin accent panel, includes welded zip tie tabs, and requires cutting for installation.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eImproves Ground Clearance\u003cbr\u003eHidden Winch Mount That Accepts Multiple Size Winches\u003cbr\u003eWinch Maximum Size: 24.25” x 10.52” x 7.15”\u003cbr\u003e1” Thick D-Ring Mounts\u003cbr\u003e20” Light Bar Mount\u003cbr\u003eTwo 3” Light Pod Mounts\u003cbr\u003eIncludes Skid Plate that Protects from Bumper to Cross Member\u003cbr\u003eRetains Factory Parking Sensors\u003cbr\u003eACC Sensor Retained in Factory Position\u003cbr\u003eWelded Zip Tie Tabs for Wire Management\u003cbr\u003eMicro-Texture Black Powder Coat Finish\u003cbr\u003eSatin Black Accent Panel Finish\u003cbr\u003eCutting is Required for Installation\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\u003cp\u003eCutting Required\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMicro-Texture Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eCN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eInstall difficulty\u003c\/th\u003e\n\u003ctd\u003e4\/5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eEstimated install time\u003c\/th\u003e\n\u003ctd\u003e6 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (DV8 Offroad):\u003c\/strong\u003e Typically in stock — 24hr ship; OOS 30-60 days.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003cp\u003e📄 \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1118\/3812\/files\/FBTT1-09_Installation_Guide_Final.pdf?v=1757001510\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":63540091421041,"sku":"FBTT1-09","price":883.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/FBTT1-09_Offtruck-1.jpg?v=1777581846"},{"product_id":"2024-2025-toyota-tacoma-stealth-fighter-winch-front-bumper","title":"2024-2025 Toyota Tacoma Stealth Fighter Winch Front Bumper","description":"\u003cp\u003eThe Stealth Fighter 4th Gen Tacoma Front Bumper is a low-profile, aggressive steel bumper with a hidden winch mount, 1-inch D-ring recovery points, and an integrated skid plate for undercarriage protection. It supports a 40-inch curved LED light bar or nine cube lights, retains factory sensors and Toyota Safety Sense, and features a durable dual-stage hammer black powder coat. Made in the USA, it delivers style, protection, and full off-road functionality.\u003cbr\u003e\u003cbr\u003e* Please Note: The bumper is not compatible with Trailhunter or TRD Pro models, and it will only fit select Hybrid models.\u003cbr\u003e\u003cbr\u003e** Please Note: Trimming is required for installation, and the bumper does not retain the OEM front skid plate.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eLow-Profile Aggressive Design\u003cbr\u003eCenter Mount for (1) Curved 40” LED Light Bar or (9) Cube Lights\u003cbr\u003eHeavy-Duty Hidden Winch Mount\u003cbr\u003ePair of 1” Thick CNC Cut Clevis Mounts for 3\/4“ D-Rings\u003cbr\u003eIntegrated Front Skid Plate\u003cbr\u003eRetains OEM Parking Sensors and TSS\u003cbr\u003eRetains All OEM Drive Assist Features\u003cbr\u003eCompatible w\/ OEM Fog Lights\u003cbr\u003e2-Stage Hammer Black Powder Coated Finish\u003cbr\u003eSteel Construction\u003cbr\u003eMade in the USA\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\u003cp\u003eCompatible With Select Hybrid Models\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eInstall difficulty\u003c\/th\u003e\n\u003ctd\u003e3\/5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eEstimated install time\u003c\/th\u003e\n\u003ctd\u003e5 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (Addictive Desert Designs):\u003c\/strong\u003e 4-6 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003cp\u003e📄 \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0627\/4508\/4140\/files\/ADD-installguide-F671203110103.pdf?v=1755097257\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":63540091617649,"sku":"F671203110103","price":2374.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/F671203110103.PT004.jpg?v=1777581857"},{"product_id":"2024-2025-toyota-tacoma-spec-series-rear-bumper","title":"2024-2025 Toyota Tacoma Spec Series Rear Bumper","description":"\u003cp\u003eOur Rear Bumper features a full-width design and two 3-inch pod light mounts. Our bumper is made from steel, and it is finished in a micro-texture black powder coat with satin black accent panels. The bumper provides welded-in zip tie tabs for wire management. Our bumper is compatible with the factory hitch, and it can be paired with our D-Ring Mounts for more recovery options. The bumper retains the factory sensors, blind spot monitoring, and license plate lights.\u003cbr\u003e\u003cbr\u003e* Please Note: Minor trimming is required for installation.\u003cbr\u003e\u003cbr\u003e** Please Note: The Spec Series is not compatible with TRD Pro or Trail Hunter models equipped with an OEM ARB Rear Bumper.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eFull-Width Design\u003cbr\u003e(2) 3” Pod Light Mounts\u003cbr\u003eCompatible w\/ OEM Hitch\u003cbr\u003eRetains OEM Sensors \u0026amp; Blind Spot Monitoring\u003cbr\u003eRetains OEM License Plate Lights\u003cbr\u003eWelded-In Zip Tie Tabs\u003cbr\u003eMicro-Texture Black Powder Coated Finish\u003cbr\u003eSatin Black Mesh Accent Panels\u003cbr\u003e3.5\/5mm Steel Construction\u003c\/p\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\u003cp\u003eBolt on (very minor trimming)\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMicro-Texture Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eCN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eInstall difficulty\u003c\/th\u003e\n\u003ctd\u003e5\/5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eEstimated install time\u003c\/th\u003e\n\u003ctd\u003e5 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (DV8 Offroad):\u003c\/strong\u003e Typically in stock — 24hr ship; OOS 30-60 days.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003cp\u003e📄 \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1118\/3812\/files\/Install_Guide_RBTT1-08_Final.pdf?v=1750780086\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":63540092043633,"sku":"RBTT1-08","price":972.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/RBTT1-08_Offtruck-1.jpg?v=1777591869"},{"product_id":"tacoma-front-lo-pro-winch-bumper-3rd-gen-2016-2023","title":"Tacoma Front Lo-Pro Winch Bumper \/ 3rd Gen \/ 2016-2023","description":"\u003cp\u003eALL BUMPERS NOW COME WITH THE “C4” LOGO CUT INTO THE LIGHT BAR CUTOUT AREA. The “C4” logo will still be cut in that location if “no cutout” is selected under light bar cutout options. “C4 Fab” will no longer be cut into the lower portion of the bumper as some of the photos show.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper. *Does not fit Warn Epic Fairlead*\u003cbr\u003eSlots in front of bumper allow for easy winch access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003e3-4” thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eCutting out the center section of the original plastic bumper is required\u003cbr\u003eShips bare steel, powder coat finish is not available.\u003cbr\u003eWeighs 75lbs\u003cbr\u003eWorks with TRD PRO Skid Plate\u003cbr\u003eBull bar is compatible with Toyota Safety Sense - only on models WITHOUT the trd pro grille\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eALL BUMPERS NOW COME WITH THE “C4” LOGO CUT INTO THE LIGHT BAR CUTOUT AREA. The “C4” logo will still be cut in that location if “no cutout” is selected under light bar cutout options. “C4 Fab” will no longer be cut into the lower portion of the bumper as some of the photos show.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper. *Does not fit Warn Epic Fairlead*\u003cbr\u003eSlots in front of bumper allow for easy winch access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003e3-4” thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eCutting out the center section of the original plastic bumper is required\u003cbr\u003eShips bare steel, powder coat finish is not available.\u003cbr\u003eWeighs 75lbs\u003cbr\u003eWorks with TRD PRO Skid Plate\u003cbr\u003eBull bar is compatible with Toyota Safety Sense - only on models WITHOUT the trd pro grille\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/ZUuvxUoyvA9\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp\u003e📄 \u003ca href=\"https:\/\/www.tacomaworld.com\/threads\/c4-fab-3rd-gen-tacoma-lo-pro-hybrid-front-winch-bumper-install-instructions.446516\/\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63540098400625,"sku":"1200-1116-30-MH-01NA","price":1251.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-1116-30-MH-01NA.08.png?v=1777592883"},{"product_id":"tacoma-front-lo-pro-winch-bumper-3rd-gen-2016-2024","title":"Tacoma Front Lo-Pro Winch Bumper \/ 3rd Gen \/ 2016-2023","description":"\u003cp\u003eALL BUMPERS NOW COME WITH THE “C4” LOGO CUT INTO THE LIGHT BAR CUTOUT AREA. The “C4” logo will still be cut in that location if “no cutout” is selected under light bar cutout options. “C4 Fab” will no longer be cut into the lower portion of the bumper as some of the photos show.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper. *Does not fit Warn Epic Fairlead*\u003cbr\u003eSlots in front of bumper allow for easy winch access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003e3-4” thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eCutting out the center section of the original plastic bumper is required\u003cbr\u003eShips bare steel, powder coat finish is not available.\u003cbr\u003eWeighs 75lbs\u003cbr\u003eWorks with TRD PRO Skid Plate\u003cbr\u003eBull bar is compatible with Toyota Safety Sense - only on models WITHOUT the trd pro grille\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eALL BUMPERS NOW COME WITH THE “C4” LOGO CUT INTO THE LIGHT BAR CUTOUT AREA. The “C4” logo will still be cut in that location if “no cutout” is selected under light bar cutout options. “C4 Fab” will no longer be cut into the lower portion of the bumper as some of the photos show.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper. *Does not fit Warn Epic Fairlead*\u003cbr\u003eSlots in front of bumper allow for easy winch access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003e3-4” thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eCutting out the center section of the original plastic bumper is required\u003cbr\u003eShips bare steel, powder coat finish is not available.\u003cbr\u003eWeighs 75lbs\u003cbr\u003eWorks with TRD PRO Skid Plate\u003cbr\u003eBull bar is compatible with Toyota Safety Sense - only on models WITHOUT the trd pro grille\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/ZUuvxUoyvA8\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp\u003e📄 \u003ca href=\"https:\/\/www.tacomaworld.com\/threads\/c4-fab-3rd-gen-tacoma-lo-pro-hybrid-front-winch-bumper-install-instructions.446516\/\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63540098433393,"sku":"1200-1116-30-MH","price":904.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-1116-30-MH-01NA.08_ee96727d-80c9-4ff7-832f-77dd9a0837a9.png?v=1777592893"},{"product_id":"tacoma-front-lo-pro-winch-bumper-3rd-gen-2016-2025","title":"Tacoma Front Lo-Pro Winch Bumper \/ 3rd Gen \/ 2016-2023","description":"\u003cp\u003eALL BUMPERS NOW COME WITH THE “C4” LOGO CUT INTO THE LIGHT BAR CUTOUT AREA. The “C4” logo will still be cut in that location if “no cutout” is selected under light bar cutout options. “C4 Fab” will no longer be cut into the lower portion of the bumper as some of the photos show.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper. *Does not fit Warn Epic Fairlead*\u003cbr\u003eSlots in front of bumper allow for easy winch access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003e3-4” thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eCutting out the center section of the original plastic bumper is required\u003cbr\u003eShips bare steel, powder coat finish is not available.\u003cbr\u003eWeighs 75lbs\u003cbr\u003eWorks with TRD PRO Skid Plate\u003cbr\u003eBull bar is compatible with Toyota Safety Sense - only on models WITHOUT the trd pro grille\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eALL BUMPERS NOW COME WITH THE “C4” LOGO CUT INTO THE LIGHT BAR CUTOUT AREA. The “C4” logo will still be cut in that location if “no cutout” is selected under light bar cutout options. “C4 Fab” will no longer be cut into the lower portion of the bumper as some of the photos show.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper. *Does not fit Warn Epic Fairlead*\u003cbr\u003eSlots in front of bumper allow for easy winch access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003e3-4” thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eCutting out the center section of the original plastic bumper is required\u003cbr\u003eShips bare steel, powder coat finish is not available.\u003cbr\u003eWeighs 75lbs\u003cbr\u003eWorks with TRD PRO Skid Plate\u003cbr\u003eBull bar is compatible with Toyota Safety Sense - only on models WITHOUT the trd pro grille\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/ZUuvxUoyvA11\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp\u003e📄 \u003ca href=\"https:\/\/www.tacomaworld.com\/threads\/c4-fab-3rd-gen-tacoma-lo-pro-hybrid-front-winch-bumper-install-instructions.446516\/\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63540098662769,"sku":"1200-1116-30-NB-01NA","price":905.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tacoma-Front-Lo-Pro-Winch-Bumper-3rd-Gen-2016-2023.jpg?v=1777592931"},{"product_id":"tacoma-overland-series-front-bumper-2nd-gen-2005-2011","title":"Tacoma Overland Series Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp\u003e100% bolt on design, no welding required.\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003e100% bolt on design, no welding required.\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63540098695537,"sku":"1200-3105-30-FHH","price":1676.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3105-30-FHH.02.png?v=1777592932"},{"product_id":"tacoma-overland-series-front-bumper-2nd-gen-2005-2012","title":"Tacoma Overland Series Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp\u003e100% bolt on design, no welding required.\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003e100% bolt on design, no welding required.\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63540098728305,"sku":"1200-3105-30-FHH-01NA","price":1811.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3105-30-FHH.02_aed557f6-4d41-4dcb-bd77-a46a4d5b7d5a.png?v=1777592936"},{"product_id":"tacoma-front-lo-pro-winch-bumper-3rd-gen-2016-2026","title":"Tacoma Front Lo-Pro Winch Bumper \/ 3rd Gen \/ 2016-2023","description":"\u003cp\u003eALL BUMPERS NOW COME WITH THE “C4” LOGO CUT INTO THE LIGHT BAR CUTOUT AREA. The “C4” logo will still be cut in that location if “no cutout” is selected under light bar cutout options. “C4 Fab” will no longer be cut into the lower portion of the bumper as some of the photos show.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper. *Does not fit Warn Epic Fairlead*\u003cbr\u003eSlots in front of bumper allow for easy winch access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003e3-4” thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eCutting out the center section of the original plastic bumper is required\u003cbr\u003eShips bare steel, powder coat finish is not available.\u003cbr\u003eWeighs 75lbs\u003cbr\u003eWorks with TRD PRO Skid Plate\u003cbr\u003eBull bar is compatible with Toyota Safety Sense - only on models WITHOUT the trd pro grille\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eALL BUMPERS NOW COME WITH THE “C4” LOGO CUT INTO THE LIGHT BAR CUTOUT AREA. The “C4” logo will still be cut in that location if “no cutout” is selected under light bar cutout options. “C4 Fab” will no longer be cut into the lower portion of the bumper as some of the photos show.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper. *Does not fit Warn Epic Fairlead*\u003cbr\u003eSlots in front of bumper allow for easy winch access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003e3-4” thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eCutting out the center section of the original plastic bumper is required\u003cbr\u003eShips bare steel, powder coat finish is not available.\u003cbr\u003eWeighs 75lbs\u003cbr\u003eWorks with TRD PRO Skid Plate\u003cbr\u003eBull bar is compatible with Toyota Safety Sense - only on models WITHOUT the trd pro grille\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/ZUuvxUoyvA10\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp\u003e📄 \u003ca href=\"https:\/\/www.tacomaworld.com\/threads\/c4-fab-3rd-gen-tacoma-lo-pro-hybrid-front-winch-bumper-install-instructions.446516\/\" target=\"_blank\" rel=\"noopener\"\u003eInstallation Guide (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541682241905,"sku":"1200-1116-30-NB","price":806.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tacoma-Front-Lo-Pro-Winch-Bumper-3rd-Gen-2016-2023_82354dfe-e18c-4ecd-a09f-98e6d0aea4e2.jpg?v=1777597257"},{"product_id":"tacoma-overland-series-front-bumper-2nd-gen-2005-2013","title":"Tacoma Overland Series Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp\u003e100% bolt on design, no welding required.\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003e100% bolt on design, no welding required.\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541682274673,"sku":"1200-3105-30-FH","price":1630.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3105-30-FH-01NA.01.jpg?v=1777597261"},{"product_id":"tacoma-overland-series-front-bumper-2nd-gen-2005-2014","title":"Tacoma Overland Series Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp\u003e100% bolt on design, no welding required.\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003e100% bolt on design, no welding required.\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541682307441,"sku":"1200-3105-30-FH-01NA","price":2104.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3105-30-FH-01NA.01_37a5abb8-89a1-4da5-8799-f5c4ac0558f3.jpg?v=1777597262"},{"product_id":"tacoma-overland-series-front-bumper-2nd-gen-2005-2015","title":"Tacoma Overland Series Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp\u003e100% bolt on design, no welding required.\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003e100% bolt on design, no welding required.\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541682340209,"sku":"1200-3105-30-MH-01NA","price":1676.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3105-30-MH.01.jpg?v=1777597264"},{"product_id":"tacoma-overland-series-front-bumper-2nd-gen-2005-2016","title":"Tacoma Overland Series Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp\u003e100% bolt on design, no welding required.\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003e100% bolt on design, no welding required.\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541682405745,"sku":"1200-3105-30-NB","price":1494.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3105-30-NB.01.jpg?v=1777597270"},{"product_id":"tacoma-overland-series-front-bumper-2nd-gen-2012-2015","title":"Tacoma Overland Series Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp\u003e100% bolt on design, no welding required. (some minor trimming required on 2012-2015 models)\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003e100% bolt on design, no welding required. (some minor trimming required on 2012-2015 models)\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541682438513,"sku":"1200-3112-30-FH","price":1630.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3112-30-FH-01NA.01.jpg?v=1777597272"},{"product_id":"tacoma-overland-series-front-bumper-2nd-gen-2012-2016","title":"Tacoma Overland Series Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp\u003e100% bolt on design, no welding required. (some minor trimming required on 2012-2015 models)\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003e100% bolt on design, no welding required. (some minor trimming required on 2012-2015 models)\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541682471281,"sku":"1200-3112-30-FH-01NA","price":2104.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3112-30-FH-01NA.01_cd289453-ef5e-4c87-8c08-b3945da60989.jpg?v=1777597276"},{"product_id":"tacoma-overland-series-front-bumper-2nd-gen-2012-2017","title":"Tacoma Overland Series Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp\u003e100% bolt on design, no welding required. (some minor trimming required on 2012-2015 models)\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003e100% bolt on design, no welding required. (some minor trimming required on 2012-2015 models)\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541682569585,"sku":"1200-3112-30-FHH","price":1996.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3112-30-FHH.02.png?v=1777597279"},{"product_id":"tacoma-overland-series-front-bumper-2nd-gen-2012-2018","title":"Tacoma Overland Series Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp\u003e100% bolt on design, no welding required. (some minor trimming required on 2012-2015 models)\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003e100% bolt on design, no welding required. (some minor trimming required on 2012-2015 models)\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541682667889,"sku":"1200-3112-30-MH","price":1540.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3112-30-MH.01.jpg?v=1777597278"},{"product_id":"tacoma-overland-series-front-bumper-2nd-gen-2012-2019","title":"Tacoma Overland Series Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp\u003e100% bolt on design, no welding required. (some minor trimming required on 2012-2015 models)\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003e100% bolt on design, no welding required. (some minor trimming required on 2012-2015 models)\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541682700657,"sku":"1200-3112-30-MH-01NA","price":1676.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3112-30-MH.01_a508b06f-8e4b-4d0b-b603-85e09531a582.jpg?v=1777597284"},{"product_id":"tacoma-overland-series-front-bumper-2nd-gen-2012-2020","title":"Tacoma Overland Series Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp\u003e100% bolt on design, no welding required. (some minor trimming required on 2012-2015 models)\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003e100% bolt on design, no welding required. (some minor trimming required on 2012-2015 models)\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541682766193,"sku":"1200-3112-30-NB","price":1780.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3112-30-NB.01.jpg?v=1777597285"},{"product_id":"tacoma-overland-series-front-bumper-2nd-gen-2012-2021","title":"Tacoma Overland Series Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp\u003e100% bolt on design, no welding required. (some minor trimming required on 2012-2015 models)\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003e100% bolt on design, no welding required. (some minor trimming required on 2012-2015 models)\u003cbr\u003eBumper offers greatly improved tire clearance, better approach angle and makes it easier to fit larger tires.\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\u003cbr\u003eBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit.(ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003e125lbs without bull bar, 130lbs with mid height bull bar, 140lbs with full height bull bar, 145lbs with full height bull bar and headlight hoops.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541682831729,"sku":"1200-3112-30-NB-01NA","price":1630.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3112-30-NB.01_5a233779-f045-4c1d-9b9d-bd185b1f6976.jpg?v=1777597290"},{"product_id":"tacoma-overland-front-bumper-3rd-gen-2016-2023","title":"Tacoma Overland Front Bumper \/ 3rd Gen \/ 2016-2023","description":"\u003cp\u003eRequires cutting of the plastic bumper to install.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eCutouts in front of bumper allow winch lever access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e115lbs without bull bar, 125lbs with mid height bull bar, 130lbs with full height bull bar, 135lbs with full height bull bar and headlight hoops.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003eMid-height bull bar not compatible with Toyota Safety Sense.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eRequires cutting of the plastic bumper to install.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eCutouts in front of bumper allow winch lever access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e115lbs without bull bar, 125lbs with mid height bull bar, 130lbs with full height bull bar, 135lbs with full height bull bar and headlight hoops.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003eMid-height bull bar not compatible with Toyota Safety Sense.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/I2rEH64_ECg\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541682864497,"sku":"1200-3116-30-FH","price":1616.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3116-30-FH.03_b118aadd-cef7-4a5e-af17-0958a9d5aa64.png?v=1777597294"},{"product_id":"tacoma-overland-front-bumper-3rd-gen-2016-2024","title":"Tacoma Overland Front Bumper \/ 3rd Gen \/ 2016-2023","description":"\u003cp\u003eRequires cutting of the plastic bumper to install.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eCutouts in front of bumper allow winch lever access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e115lbs without bull bar, 125lbs with mid height bull bar, 130lbs with full height bull bar, 135lbs with full height bull bar and headlight hoops.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003eMid-height bull bar not compatible with Toyota Safety Sense.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eRequires cutting of the plastic bumper to install.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eCutouts in front of bumper allow winch lever access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e115lbs without bull bar, 125lbs with mid height bull bar, 130lbs with full height bull bar, 135lbs with full height bull bar and headlight hoops.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003eMid-height bull bar not compatible with Toyota Safety Sense.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/I2rEH64_ECg\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541682897265,"sku":"1200-3116-30-FH-01NA","price":1811.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3116-30-FH.03.png?v=1777597291"},{"product_id":"tacoma-overland-front-bumper-3rd-gen-2016-2025","title":"Tacoma Overland Front Bumper \/ 3rd Gen \/ 2016-2023","description":"\u003cp\u003eRequires cutting of the plastic bumper to install.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eCutouts in front of bumper allow winch lever access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e115lbs without bull bar, 125lbs with mid height bull bar, 130lbs with full height bull bar, 135lbs with full height bull bar and headlight hoops.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003eMid-height bull bar not compatible with Toyota Safety Sense.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eRequires cutting of the plastic bumper to install.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eCutouts in front of bumper allow winch lever access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e115lbs without bull bar, 125lbs with mid height bull bar, 130lbs with full height bull bar, 135lbs with full height bull bar and headlight hoops.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003eMid-height bull bar not compatible with Toyota Safety Sense.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/I2rEH64_ECg\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541682962801,"sku":"1200-3116-30-FHH","price":1661.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3116-30-FHH.03.png?v=1777597292"},{"product_id":"tacoma-overland-front-bumper-3rd-gen-2016-2026","title":"Tacoma Overland Front Bumper \/ 3rd Gen \/ 2016-2023","description":"\u003cp\u003eRequires cutting of the plastic bumper to install.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eCutouts in front of bumper allow winch lever access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e115lbs without bull bar, 125lbs with mid height bull bar, 130lbs with full height bull bar, 135lbs with full height bull bar and headlight hoops.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003eMid-height bull bar not compatible with Toyota Safety Sense.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eRequires cutting of the plastic bumper to install.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eCutouts in front of bumper allow winch lever access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e115lbs without bull bar, 125lbs with mid height bull bar, 130lbs with full height bull bar, 135lbs with full height bull bar and headlight hoops.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003eMid-height bull bar not compatible with Toyota Safety Sense.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/I2rEH64_ECg\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541683028337,"sku":"1200-3116-30-FHH-01NA","price":1866.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3116-30-FHH.03_1d682db1-7866-46d8-baf6-e4bdb6bc72ab.png?v=1777597297"},{"product_id":"tacoma-overland-front-bumper-3rd-gen-2016-2027","title":"Tacoma Overland Front Bumper \/ 3rd Gen \/ 2016-2023","description":"\u003cp\u003eRequires cutting of the plastic bumper to install.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eCutouts in front of bumper allow winch lever access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e115lbs without bull bar, 125lbs with mid height bull bar, 130lbs with full height bull bar, 135lbs with full height bull bar and headlight hoops.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003eMid-height bull bar not compatible with Toyota Safety Sense.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eRequires cutting of the plastic bumper to install.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eCutouts in front of bumper allow winch lever access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e115lbs without bull bar, 125lbs with mid height bull bar, 130lbs with full height bull bar, 135lbs with full height bull bar and headlight hoops.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003eMid-height bull bar not compatible with Toyota Safety Sense.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/I2rEH64_ECg\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541683159409,"sku":"1200-3116-30-MH","price":1817.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3116-30-MH.01.png?v=1777597307"},{"product_id":"tacoma-overland-front-bumper-3rd-gen-2016-2028","title":"Tacoma Overland Front Bumper \/ 3rd Gen \/ 2016-2023","description":"\u003cp\u003eRequires cutting of the plastic bumper to install.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eCutouts in front of bumper allow winch lever access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e115lbs without bull bar, 125lbs with mid height bull bar, 130lbs with full height bull bar, 135lbs with full height bull bar and headlight hoops.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003eMid-height bull bar not compatible with Toyota Safety Sense.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eRequires cutting of the plastic bumper to install.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eCutouts in front of bumper allow winch lever access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e115lbs without bull bar, 125lbs with mid height bull bar, 130lbs with full height bull bar, 135lbs with full height bull bar and headlight hoops.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003eMid-height bull bar not compatible with Toyota Safety Sense.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/I2rEH64_ECg\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541683224945,"sku":"1200-3116-30-MH-01NA","price":1721.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3116-30-MH.01_14017b01-2039-4c15-bd19-6597978460aa.png?v=1777597309"},{"product_id":"tacoma-overland-front-bumper-3rd-gen-2016-2029","title":"Tacoma Overland Front Bumper \/ 3rd Gen \/ 2016-2023","description":"\u003cp\u003eRequires cutting of the plastic bumper to install.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eCutouts in front of bumper allow winch lever access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e115lbs without bull bar, 125lbs with mid height bull bar, 130lbs with full height bull bar, 135lbs with full height bull bar and headlight hoops.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003eMid-height bull bar not compatible with Toyota Safety Sense.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eRequires cutting of the plastic bumper to install.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eCutouts in front of bumper allow winch lever access.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eFog light pockets designed for Baja Designs Squadron lights. (Factory fog lights not supported)\u003cbr\u003eBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003e115lbs without bull bar, 125lbs with mid height bull bar, 130lbs with full height bull bar, 135lbs with full height bull bar and headlight hoops.\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.\u003cbr\u003eMid-height bull bar not compatible with Toyota Safety Sense.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/I2rEH64_ECg\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541683356017,"sku":"1200-3116-30-NB","price":1457.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3116-30-NB.03.png?v=1777597313"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2005-2011","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541683421553,"sku":"1200-3205-30-FH","price":1430.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tacoma-Hybrid-Front-Bumper-2nd-Gen-2005-2011.jpg?v=1777597314"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2005-2012","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541683487089,"sku":"1200-3205-30-FH-01NA","price":1942.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tacoma-Hybrid-Front-Bumper-2nd-Gen-2005-2011_c76cd37a-76f7-42da-97a6-752a10a19adb.jpg?v=1777597319"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2005-2013","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541683552625,"sku":"1200-3205-30-FH-W","price":1785.24,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tacoma-Hybrid-Front-Bumper-2nd-Gen-2005-2011_69ec5df3-24a4-4a0d-a091-210ef5927457.jpg?v=1777597321"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2005-2014","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541683585393,"sku":"1200-3205-30-FH-W-01NA","price":1685.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tacoma-Hybrid-Front-Bumper-2nd-Gen-2005-2011_9e5dd74d-d0ad-43e8-b0b2-163c22386175.jpg?v=1777597322"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2005-2015","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541683618161,"sku":"1200-3205-30-MH","price":1339.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3205-30-MH-01NA.15.jpg?v=1777597326"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2005-2016","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541683683697,"sku":"1200-3205-30-MH-01NA","price":1503.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3205-30-MH-01NA.15_c7de74f5-d00d-4d3a-bb91-c4efcc4cd77c.jpg?v=1777597327"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2005-2017","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541683716465,"sku":"1200-3205-30-MH-W-01NA","price":1594.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3205-30-MH-W-01NA.15.jpg?v=1777597328"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2005-2018","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541683749233,"sku":"1200-3205-30-MH-W","price":1407.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3205-30-MH-W-01NA.15_a3c31134-a3ca-4cfe-a917-7bbb3c8552ae.jpg?v=1777597329"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2005-2019","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541683847537,"sku":"1200-3205-30-NB","price":1515.24,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3205-30-NB-01NA.01.jpg?v=1777597343"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2005-2020","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541683880305,"sku":"1200-3205-30-NB-01NA","price":1726.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3205-30-NB-01NA.01_a2795add-4bf9-4ac9-9228-9a3ddcb737c4.jpg?v=1777597345"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2005-2021","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2005-2011","description":"\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eStraightforward installation, 100% bolt on bumper, no cutting or welding of any kind required.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd gen Tacoma Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541683913073,"sku":"1200-3205-30-NB-W-01NA","price":1503.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3205-30-NB-W-01NA.01.jpg?v=1777597347"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2012-2015","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541683978609,"sku":"1200-3212-30-FH","price":1430.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tacoma-Hybrid-Front-Bumper-2nd-Gen-2012-2015.jpg?v=1777597347"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2012-2016","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541684011377,"sku":"1200-3212-30-FH-01NA","price":1543.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tacoma-Hybrid-Front-Bumper-2nd-Gen-2012-2015_b5daab9e-afca-4d7d-b775-4ac598a4ab91.jpg?v=1777597348"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2012-2017","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541684044145,"sku":"1200-3212-30-FH-W","price":1785.24,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3212-30-FH-W-01NA.13.jpg?v=1777597352"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2012-2018","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541684109681,"sku":"1200-3212-30-MH","price":1339.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3212-30-MH-01NA.05.png?v=1777597354"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2012-2019","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541684142449,"sku":"1200-3212-30-MH-01NA","price":1503.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3212-30-MH-01NA.05_6f6b5386-9215-4531-9e69-ada818be6bfe.png?v=1777597355"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2012-2020","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541684175217,"sku":"1200-3212-30-MH-W-01NA","price":1630.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tacoma-Hybrid-Front-Bumper-2nd-Gen-2012-2015_429efa24-c934-4846-bdd6-a21910f0ecf8.jpg?v=1777597355"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2012-2021","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541684339057,"sku":"1200-3212-30-NB","price":1271.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tacoma-Hybrid-Front-Bumper-2nd-Gen-2012-2015_1200-3212-30-NB_2.jpg?v=1777597360"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2012-2022","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541684568433,"sku":"1200-3212-30-NB-01NA","price":1449.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tacoma-Hybrid-Front-Bumper-2nd-Gen-2012-2015_1200-3212-30-NB_2_3200f35a-d6b7-4b9a-a617-91b9509fb22a.jpg?v=1777597363"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2012-2023","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541684699505,"sku":"1200-3212-30-NB-W","price":1339.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tacoma-Hybrid-Front-Bumper-2nd-Gen-2012-2015_3f27f0f9-ec14-4e12-9672-70947b5d4415.jpg?v=1777597367"},{"product_id":"tacoma-hybrid-front-bumper-2nd-gen-2012-2024","title":"Tacoma Hybrid Front Bumper \/ 2nd Gen \/ 2012-2015","description":"\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eBumper is 100% bolt on. Minor trimming of the Sheet metal bracket under the headlights is required. No welding or plastic bumper cutting required for installation.\u003cbr\u003eAll bumpers are winch compatible.\u003cbr\u003eBumper has cutouts in the front to allow access to winch rope and clutch lever.\u003cbr\u003eFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\u003cbr\u003eWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\u003cbr\u003eBumper winch plate and mounting plates are 1\/4″ thick steel. Bumper main body is 3\/16″ thick steel. Tubing is all 1 3\/4″ OD, 1\/8″ wall thickness.\u003cbr\u003e3\/4″ thick D-ring tabs fully welded front and back come standard.\u003cbr\u003eBumper without Bull Bar weighs 125lbs. Bumper with Mid-Height Bull Bar weighs 130 lbs. Bumper with Full Height Bull Bar and side tube gussets weighs 137 lbs.\u003cbr\u003eBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\u003cbr\u003eAdditional Front Bumper Frame Support Brackets included with all 2nd Gen Tacoma Overland and Hybrid front bumpers! ($177.00 value).\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/5d2srZk6aKs\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541684732273,"sku":"1200-3212-30-NB-W-01NA","price":1791.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/Tacoma-Hybrid-Front-Bumper-2nd-Gen-2012-2015_b5a66026-37c2-4658-94ca-c5b6c0d36796.jpg?v=1777597369"},{"product_id":"tacoma-hybrid-front-bumper-3rd-gen-2016-2023","title":"Tacoma Hybrid Front Bumper \/ 3rd Gen \/ 2016-2023","description":"\u003cp\u003eFitment:\u003cbr\u003e\u003cbr\u003eRequires cutting of the plastic bumper to install.\u003cbr\u003e\u003cbr\u003eMid-height bull bar not compatible with Toyota Safety Sense.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e\u003cbr\u003eIntegrated Hidden Winch Mount\u003cbr\u003e\u003cbr\u003eCutouts Provide Easy Access to Winch Lever\u003cbr\u003e\u003cbr\u003eBumper Mounting Plates are 1\/4″ Steel\u003cbr\u003e\u003cbr\u003eBumper Main Body is 3\/16″ Steel\u003cbr\u003e\u003cbr\u003eTubing is all 1 3\/4″ OD, 1\/8″ Wall Thickness.\u003cbr\u003e\u003cbr\u003e115 lbs without top tubing, 125 lbs with top tubing\u003cbr\u003e\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003eAdd-Ons:\u003cbr\u003e\u003cbr\u003eSpecifically Designed to fit Optional Baja Designs S8 30” Light Bar\u003cbr\u003e\u003cbr\u003eOptional Mounting Point for Extreme LED 30” or RIGID SR 30” Light Bars\u003cbr\u003e\u003cbr\u003eSpecifically Designed to fit 4 Baja Designs Squadrons and 2 Baja Designs S2 Lights\u003cbr\u003e\u003cbr\u003e¾” Thick Reinforced Clevis Mounts for D-Rings\u003cbr\u003e\u003cbr\u003eFits Most Winches 8k-12k in Size. Winches with the ability to relocate control box recommended. Confirmed fitment on ComeUp, Smittybilt X20, Warn Zeon and VR series winches.\u003cbr\u003e\u003cbr\u003eWe Recommend Synthetic Rope Winches \u0026amp; Hawse Style Fairleads for Best Functionality\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eFitment:\u003cbr\u003e\u003cbr\u003eRequires cutting of the plastic bumper to install.\u003cbr\u003e\u003cbr\u003eMid-height bull bar not compatible with Toyota Safety Sense.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e\u003cbr\u003eIntegrated Hidden Winch Mount\u003cbr\u003e\u003cbr\u003eCutouts Provide Easy Access to Winch Lever\u003cbr\u003e\u003cbr\u003eBumper Mounting Plates are 1\/4″ Steel\u003cbr\u003e\u003cbr\u003eBumper Main Body is 3\/16″ Steel\u003cbr\u003e\u003cbr\u003eTubing is all 1 3\/4″ OD, 1\/8″ Wall Thickness.\u003cbr\u003e\u003cbr\u003e115 lbs without top tubing, 125 lbs with top tubing\u003cbr\u003e\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003eAdd-Ons:\u003cbr\u003e\u003cbr\u003eSpecifically Designed to fit Optional Baja Designs S8 30” Light Bar\u003cbr\u003e\u003cbr\u003eOptional Mounting Point for Extreme LED 30” or RIGID SR 30” Light Bars\u003cbr\u003e\u003cbr\u003eSpecifically Designed to fit 4 Baja Designs Squadrons and 2 Baja Designs S2 Lights\u003cbr\u003e\u003cbr\u003e¾” Thick Reinforced Clevis Mounts for D-Rings\u003cbr\u003e\u003cbr\u003eFits Most Winches 8k-12k in Size. Winches with the ability to relocate control box recommended. Confirmed fitment on ComeUp, Smittybilt X20, Warn Zeon and VR series winches.\u003cbr\u003e\u003cbr\u003eWe Recommend Synthetic Rope Winches \u0026amp; Hawse Style Fairleads for Best Functionality\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eHammer Black Powder Coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/I2rEH64_ECg\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541684765041,"sku":"1200-3216-30-FH-01NA","price":1685.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3216-30-FH-01NA.03.jpg?v=1777597372"},{"product_id":"tacoma-hybrid-front-bumper-3rd-gen-2016-2024","title":"Tacoma Hybrid Front Bumper \/ 3rd Gen \/ 2016-2023","description":"\u003cp\u003eFitment:\u003cbr\u003e\u003cbr\u003eRequires cutting of the plastic bumper to install.\u003cbr\u003e\u003cbr\u003eMid-height bull bar not compatible with Toyota Safety Sense.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e\u003cbr\u003eIntegrated Hidden Winch Mount\u003cbr\u003e\u003cbr\u003eCutouts Provide Easy Access to Winch Lever\u003cbr\u003e\u003cbr\u003eBumper Mounting Plates are 1\/4″ Steel\u003cbr\u003e\u003cbr\u003eBumper Main Body is 3\/16″ Steel\u003cbr\u003e\u003cbr\u003eTubing is all 1 3\/4″ OD, 1\/8″ Wall Thickness.\u003cbr\u003e\u003cbr\u003e115 lbs without top tubing, 125 lbs with top tubing\u003cbr\u003e\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003eAdd-Ons:\u003cbr\u003e\u003cbr\u003eSpecifically Designed to fit Optional Baja Designs S8 30” Light Bar\u003cbr\u003e\u003cbr\u003eOptional Mounting Point for Extreme LED 30” or RIGID SR 30” Light Bars\u003cbr\u003e\u003cbr\u003eSpecifically Designed to fit 4 Baja Designs Squadrons and 2 Baja Designs S2 Lights\u003cbr\u003e\u003cbr\u003e¾” Thick Reinforced Clevis Mounts for D-Rings\u003cbr\u003e\u003cbr\u003eFits Most Winches 8k-12k in Size. Winches with the ability to relocate control box recommended. Confirmed fitment on ComeUp, Smittybilt X20, Warn Zeon and VR series winches.\u003cbr\u003e\u003cbr\u003eWe Recommend Synthetic Rope Winches \u0026amp; Hawse Style Fairleads for Best Functionality\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\u003cp\u003eFitment:\u003cbr\u003e\u003cbr\u003eRequires cutting of the plastic bumper to install.\u003cbr\u003e\u003cbr\u003eMid-height bull bar not compatible with Toyota Safety Sense.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e\u003cbr\u003eIntegrated Hidden Winch Mount\u003cbr\u003e\u003cbr\u003eCutouts Provide Easy Access to Winch Lever\u003cbr\u003e\u003cbr\u003eBumper Mounting Plates are 1\/4″ Steel\u003cbr\u003e\u003cbr\u003eBumper Main Body is 3\/16″ Steel\u003cbr\u003e\u003cbr\u003eTubing is all 1 3\/4″ OD, 1\/8″ Wall Thickness.\u003cbr\u003e\u003cbr\u003e115 lbs without top tubing, 125 lbs with top tubing\u003cbr\u003e\u003cbr\u003eUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\u003cbr\u003e\u003cbr\u003eAdd-Ons:\u003cbr\u003e\u003cbr\u003eSpecifically Designed to fit Optional Baja Designs S8 30” Light Bar\u003cbr\u003e\u003cbr\u003eOptional Mounting Point for Extreme LED 30” or RIGID SR 30” Light Bars\u003cbr\u003e\u003cbr\u003eSpecifically Designed to fit 4 Baja Designs Squadrons and 2 Baja Designs S2 Lights\u003cbr\u003e\u003cbr\u003e¾” Thick Reinforced Clevis Mounts for D-Rings\u003cbr\u003e\u003cbr\u003eFits Most Winches 8k-12k in Size. Winches with the ability to relocate control box recommended. Confirmed fitment on ComeUp, Smittybilt X20, Warn Zeon and VR series winches.\u003cbr\u003e\u003cbr\u003eWe Recommend Synthetic Rope Winches \u0026amp; Hawse Style Fairleads for Best Functionality\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eRaw - Unfinished\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 YR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align:left;padding:4px 12px 4px 0\"\u003eCountry of origin\u003c\/th\u003e\n\u003ctd\u003eUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eBrand lead time (C4 Fabrication):\u003c\/strong\u003e 6-8 weeks.\u003c\/p\u003e\u003cp\u003eThis product ships directly from the manufacturer. Tracking will be provided once the order is released for shipping.\u003c\/p\u003e\n\u003ch3\u003eInstallation Video\u003c\/h3\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/I2rEH64_ECg\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"font-size:0.9em;color:#666\"\u003e\u003cstrong\u003e⚠ California Prop 65:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":63541684830577,"sku":"1200-3216-30-FH-W","price":1544.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/8262\/9489\/files\/1200-3216-30-FH-W-01NA.03.jpg?v=1777597375"}],"url":"https:\/\/wrench-lab.com\/collections\/o-bumpers-toyota-tacoma.oembed?page=2","provider":"WrenchLab","version":"1.0","type":"link"}